Anti Gravity Sound Humidifier User Manual

Anti Gravity Sound Humidifier User Manual

Anti Gravity Sound Humidifier User Manual

(2BG2W-T00K8)

Before use: please use purified water

Important points to Note

In order to ensure the qualitly of the product, before leaving the factory will be solid water test, after receiving the product has a small amounf of water droplets residue, is a nomal phenomenon.

The shape and spacing of each water droplet in the product are different, and it is noral that the water droplet produced by each product is different.

As the gas in the water pipe is not exhausled, it is nomal for the water droplet to have a delay(water droplet does not form)when slarling the machine, and the delay is about 30s 60sLet and right.the water wi fom naturally, piease be patent.

Product schematic diagrar

  1. Press the power button to turn on and then turn off;
  2. Press the light button to change the color of the colored lights;
  3. Press the “+” button to move on to the next song.and long press to increase the sound;
  4. Press and hold the “_” button to go back to the previoussong,then press and hold to decrease the volume.
  5. Charging port;
  6. Can connect to Bluetooth to play music(Bluetooth name: TOOKS)
Name: Anti Gravity Sound Humidifier
Water Tank Capacity: 350 ml
Running Time: 8 hours
Rated Power: 5 W
Rated Voltage: 5 V
Power Supply: 5 V = 2 A
Bluetooth Function: TOOK8
Model: TOOK8
Size: 235 x 238 x 80 mm
Color: White
Weight: 650 g
Material: ABS + Silica Gel
Fog Quantity: 60-80 ml/h

Product operation instructions

  1. Unscrew the top cover.
  2. Fill the tank with pure water.

Note: Please add 40°C The following clean tap water or purified water.

3. Power on the adapter.

4. Touch the button and fog begins.

Note: Please ensure that there is enough water in the tank before use. Do not add alcohol perfume

Content list

Anti-gravity humidifier*1 Charge Cable*1 Instruction Manual*1

Common Failures and Troubleshooting

Malfunction Reason Solution
Can not start Wrong Power Adapter Use a 5V-2A power adapter before turing it on again
Can not generate Mistorsubstantaly little mist There may be dirtin the atomizer piece that is clogging the hole atthe bottom of the atomization plece. Use a cotton swab dipped in white vinegar to gentiywipethe atomnlzation plece to clean the dirt, and replace a newultrasonic atomization piece
Not sufficientwater in the watertank Fill waterinto the tan k until it reaches the water line
Can not from Water drops Delayed start-up, empty pump Restart again
Wrong power adapter Use a 5V-2A power adapter beforetumingit on again
LED does not light up Motherboard bumed out Contact after-sales semvice
Cable not connected property Reconnect the cable or change the power adapter
Button can not be pressed The button is jamred Contact after-sales service
ButtonMatfunction Motherboard burned out Contact after-sales service

 

Leave a Comment