Table of Contents
MERKURY Innovations Touch Lamp with Wireless Speaker User Manual
MERKURY Innovations Touch Lamp with Wireless Speaker User Manual
Ningbo Beslight Imp.&Exp. Touch Lamp with Wireless Speaker User Manual
MERKURY BT133 User Manual
FCC id: 2BHJU203546
ON-BOARD CONTROLS (TOP)
SPECIFICATIONS
Product Specifications:
- Dimensions: 4.1″ x 4.1″ x 14” (Height x Width x Depth)
- Weight: 1.12lb
- Input Voltage: 5V 1A
- Output Voltage: 3.7V
- Output Watts: 3W
- Indoor use only
Bluetooth® Information:
BT Version: V5.4
Bluetooth® Range: 10m
Technical specifications:
- Sound: Mono
- Bluetooth IC Model and Version: ABS365A / V5.4
- Bluetooth Pairing Name: MERKURY BT133
- Bluetooth Speaker Output: SW
- Frequency Response: 20Hz-20kHz
- Distortion: <10% (Tested with iPhone at max volume)
- SNR: 285dB (Tested with iPhone at max volume)
- Charging Current: Max 1000mA
- Battery Capacity: 2000mAh
- Bluetooth Range: 10 meters
- BQB Certification for BT IC: Yes
- Battery with PCM: Yes
- Play Time: 3.5-4 hours
- Charging Time: 3-4 hours
- Charging Port Type: Type C
- Number of Channels: 1
- Speaker Size: ®40mm H=21mm
INSTRUCTIONS:
Charging the Battery:
- Use the provided USB cable to fully charge the desk lamp.
- Place the lamp on a stable surface.
- Touch the power button on top to turn on the lamp.
Using the Lamp:
- Touch the power button to cycle through the three light modes: warm white, cold white, and neutral light.
- Press and hold the power button to adjust the brightness infinitely in the current light mode.
- Touch the power button again to turn off the lamp.
Connecting to a Bluetooth Device:
- Press the power button to turn on the lamp.
- On your Bluetooth device, search for “MERKURY BT133” in the list of available devices.
- Select “MERKURY BT133” to connect. An alert will sound indicating the speaker is connected
- You can now play music through the speaker.
TROUBLESHOOTING
| No Power | Recharge your TouchSound speaker using the included USB type C charging cable.
If not working try using a different cable. |
| Music is not playing | Make sure your Bluetooth® device has A2DP profile. over Bluetooth® Check if both devices are paired and connected over Bluetooth®. Restart the speaker to reconnect your Bluetooth® device. |
| Bluetooth® device will not reconnect with the speaker | Navigate to your Bluetooth® settings menu on your Bluetooth® device, tap “MERKURY BT133″ and select “Forget”. Now follow the steps to pair your device again. |
TECHNICAL SUPPORT
If you are experiencing problems, do not attempt to fix the product by yourself or return it to the store you bought it from.
Please refer to the user manual or just contact our helpful support team:
Merkury Innovations
45 Broadway, 3rd Floor,
New York, New York 10006