HAFF01 Bluetooth Speaker User Manual

HAFF01 Bluetooth Speaker User Manual

Haoyue Supply Chain HAFF01 Bluetooth Speaker User Manual

FCC id: 2BKB5-HAFF01

Bluetooth Speaker User’s Manual Ver 1.0

Welcome to purchase our speaker, in order to let you use this product better, please read the manual carefully.

* Due to the iterative upgrading of the product, there may be some changes in the description and packaging. Please refer tcetreal object!

Packing List

Button/Interface Introduction

1. On, Off/Mode switching/Indicator TWS connection
2. EQ switch / Play pause /Answer&hang up the call/ Disconnect Bluetooth
3. Volume + / Next track
4. Volume – /previous track
5. 3.5 AUX audio input
6. Type-C charging port
7. Reset
8. TF card
9. U disk

Button function description

Button	Operation	Function Description
	Short press Long press Double click	Mode switching: Bluetooth / Aux / TF / U disk play Long press for 3 seconds to turn on / off Initiate TWS pairing. After pairing is successful, you can double-click to disconnect TWS
	Short press Double click Long press Incoming call short press	Pause / playing Switch EQ mode Long press for 3 seconds to disconnect the Bluetooth connection Short press to answer the call when calling, and short press to end the call during the call
	Short press Long press	Volume up Next track
	Short press Long press	Volume down Previous track
	Press for 2 seconds at the same time	Light on/off

Function usage

Bluetooth connection

Long press the power button for 3 seconds to start the speaker. The machine enters the Bluetooth mode. The blue light of the power button icon flashes to enter the pairing state. The mobile phone searches for the Bluetooth name “ HAFF01 ‘ and clicks to connect.

TF card/U-disk/Aux in mode

• Insert the TF card into the card slot or insert the U-disk to the U-disk slot,the bluetooth speaker automatically enter TF card or U-disk mode to play music. (The Max capacity is 32G for TF card or U-diskit can be recognized by the speaker)
• Connect any audio device with a 3.5mm jack and connect it to the aux audio cable to play.

Function usage

TWS

1. Turn on the two speakers (* if there is a Bluetooth device connected, the Bluetooth connection must be disconnected first)
2. Double click the “” of one of the speakers to enter TWS pairing, and there is a prompt tone; After successful pairing, the blue light of the of the main machine flashes quickly, and the of the auxiliary machine is always on.
3. At this time, open the Bluetooth device, search for the Bluetooth name * HAFF01 * , and click Connect. Play music and enjoy wireless stereo sound.
4. Double click to disconnect TWS pairing when TWS is connected.
5. After the TWS connection is successful, the machine will automatically enter the TWS interconnection (under the state of non active disconnection of TWS) after each startup

Specifications

Bluetooth version	V5.0	Charging voltage	5V2A
Bluetooth transmission distance	≥10m	Charging time	4-5H
Power	2*20W	Frequency response	60hz—18Khz
Capacity of battery	2600mAh*2	Waterproof level	IPX7
Local decoding	Support MP3/FLAC/APE/WMA	Product size	105*105*130mm

Certificate and Warranty Card

Kindly reminder

• Please check the charger specifications before charging, do not use fast charging or high voltage chargers to charge the speaker. For hearing health, please do not use it at maximum volume for a long time.
• Do not use it near a fire source or in a high temperature environment to avoid permanent damage to the speaker.
• Please use it strictly in accordance with the instructions, and do not modify or disassemble the product without permission.
• Do not drop, impact, knock, squeeze or other behaviors that seriously affect the product structure to avoid damage to the strength and reliability of the product.
• If you encounter high temperature, deformation, corrosion and other abnormalities during use, please stop using it immediately and contact the merchant for proper disposal.

Executive standard ©: GB8998 -2011;GB/T13837 – 2012;GB17625.1 – 2012