Table of Contents
RADIOSHACK SPEAKER BOX User Manual
RADIOSHACK SPEAKER BOX User Manual
FCC id: 2BDUR-4001941
12″ & 15” 2-WAY P.A. SPEAKER
models: 4001941 / 4001945
PACKING CONTENTS
- 1x speaker
- 1x remote control
- 1x user’s guide
- 1x power cable
- 1x wired microphone
- 1x speaker tripod (4001941 tripod pack separately by extra carton)
SPECIFICATIONS
Model | 4001941 | 4001945 |
TYPE | Active speaker with battery | Active speaker with battery |
AC INPUT | AC100-240V,50/60Hz | AC100-240V,50/60Hz |
WOOFER | 12″ | 15″ |
VOICE COIL | 1.5″ (38mm) | 1.5″ (38mm) |
MAGNET | 30Oz | 30Oz |
SENSIVITY | 93dB (+/-3dB) | 95dB (+/-3dB) |
FREQUENCY RESPONSE | 50Hz-20KHz | 50Hz-20KHz |
TWEETER | 25mm | 25mm |
POWER | 100W | 100W |
FUNCTION | USB, FM, Bluetooth | USB, FM, Bluetooth |
REMOTE CONTROL | Yes | Yes |
BATTERY CAPACITY | 12V, 5AH | 12V, 5AH |
4001941 CONTROL PANEL
4001945 CONTROL PANEL
PLAYER CONTROLS
MODE
Select an operating mode, the options are: Bluetooth, AUX, USB and FM
PLAY/PAUSE:
- Press to play a song or pause whille playing a song
- When you choose FM mode, when pressing this button it will automatically search the FM stations
CYCLE PLAY MODE:
press once to select a player mode, the options are:
- One: select this to play current song indefinitely
- All: with this option you can repeat all music
NEXT/VOLUME +:
- Press once to jump next song / press and hold to raise the volume level.
- In FM mode,press it to go to the next stations.
PREVIOUS/VOLUME-:
- Press once to jump previous song / press and hold to diminish the volume level.
- In FM mode,press it jump to the previous stations.
CONNECTION BLUETOOTH
- To pair the speaker with a Bluetooth phone or audio device, press “MODE” repeatedly on the MP3 player until select this mode.
- Put your phone or device to be used in Bluetooth device discovery mode.
- When your phone or device shows the “RS 4001941 / RS 4001945 “ device, confirm the link.
REMOTE CONTROL
|
CAUTION
- Avoid exposing the speaker box to moisture. If they are set up outdoors, be sure they are under cover.
- Do not use or store the equipment near wet or damp places. It may cause a malfunction or shock hazard.
- If the power cord is broken, it must be replaced by the manufacturer or service agent or qualified personnel to avoid risks
- To reduce the risk of fire or electric shock do not expose this equipment to rain or moisture.
- Clean only with a soft, dry cloth