Relocate

1. Plug the extender into a power outlet located between your router (Home Network) and the “dead” Wi-Fi hotspot. The location you choose must be within the range of your existing home network.
2. Wait until the LED © is solid green. If it is not, relocate the extender closer to the router to achieve good (or better) signal quality.

Enjoy!

Extended Network Names: The name of the main router’s network ends with _EXT. However, they can have different SSIDs (network names) if you customized them during setup.

Extended Network Password: They share the same passwords as your main networks.

WiFi Repeater Mode

In this mode, the router extends the existing wireless coverage in your home.

1. Connect your Router

Plua the extender into a power outiet near vour main router and wait until

2. Set repeater mode

[TSETEITH Using WPS (Wi-Fi Protected Setup)

Using WPS is an easier way to extend your main network.

It is recommended that you use this method if your main router has

the the WPS button. The button might look like one of these:

Connect

Using a Web Browser for Mobile Phone Users Connected to the MT02 Router

1. Find the SSID (Network Name) printed on the label of the MT02 router.
2. Connect your mobile phone to the MT02 router’s network.

Connect to the extender’s network: Extender-a4f97¢ (the SSID on the router’s MT02 label).

Frequently Asked Questions (FAQ)

Q1. What should I do if the login window does not appear?

1. If the computer is configured with a static or fixed IP address, change the settings to obtain an IP address automatically.
2. Check if http://192.168.11.1 is entered correctly in the web browser.
3. Ensure your computer is connected to the Mini Router’s network.
4. Try using another web browser and attempt to log in again.
5. Restart your router and attempt to log in again.
6. Disable the currently used network adapter and then re-enable it.

Q2. What should I do if I cannot access the Internet?

1. Check if the Internet is working properly by connecting a computer directly to the modem using an Ethernet cable.
2. If not, contact your Internet service provider. Restart your router and try again.

Q3. How do I reset the router to factory settings?

1. While the router is powered on, press and hold the reset button on the back panel of the router for approximately 5 seconds.

Q4. Why is the repeater mode not setting up successfully?

1. You may have entered the router’s wireless password incorrectly. Please log in and verify the wireless password.
2. The Mini Router may be out of range. Move it closer to the router.
3. Reset the Mini Router and reconfigure it.
4. If you need to reset the extender, press and hold the reset button inside the small hole for 10 seconds.

AP mode

In this mode, the router transforms your existing wired network into a ‘wireless network.

1. Connect your router

2. Connect to the MTO02 router

For mobile phone users

1. Find the SSID (network name) printed on the label of the MT02 router.

2. Connect your mobile phone to the MT02 router’s network.

Connect to the extender’s network: Extender-a4t97c (the SSID on the label of the MT02 router).

3. Set the wifi password

4. Resetting the device

Mode selection

Select router mode, click next.

Your Internet connection settings should be configured according to the service information provided by your Internet service provider.

Click finish to reboot the device.

1. Your Internet connection settings: You can change these settings according to the service information provided by your Internet service provider.

If you choose to use a static IP, enter the information provided by your Internet service provider in the appropriate fields.

Enjoy!

Connect to the extended networks using the default SSID and password to enjoy the internet. However, if you customized them during setup, the network name and password may be different.

Router mode

1. Connect Your Router

If your Internet connection is through a DSL/cable modem, follow steps 1, 2, and 4 to complete the hardware connections.

If your Internet connection is through an Ethernet cable from the wall, follow steps 3 and 4 to complete the hardware connections.

 

2. Connect to the MT02 Router

For Mobile Phone Users

1. Locate the SSID (network name) printed on the label of the MT02 router.
2. Connect your mobile phone to the network of the MT02 router.

Connect to the extender’s network: Extender-a4f97c (this is the SSID found on the label of the MT02 router).

PDF

2a2f4_mt02_4_usersmanual_7866494_b2bc01b2d8