Table of Contents
Q9 Wireless Lavalier Microphone
User Manual
Accessories:
- 2 Transmitters
- 1 Receiver
- 1 Charging Case
- 1 Charging Cable
- 1 Monitor Headphone
- 1 Adapter (Type-C to Lightning)
- 1 Organizer
- 1 Instruction Manual
Methods of Use
1. Linking:
- Routine use: Open the charging compartment, take out the receiver, and insert it into the cell phone. The 2.4G indicator light will flash. Next, take out the transmitter and long-press the power button for 2 seconds; the connection icon will flash, and the product will automatically connect. The connection is successful when the blue light remains steady.
- Simultaneous recording of voice and background sounds (requires two cell phones):Cell phone one (recording sound use): Open the charging compartment, take out the receiver, and insert it into the cell phone. The 2.4G indicator light will flash. Take out the transmitter, long-press the power button for 2 seconds; when the connection icon flashes, the product is connecting. The connection is successful once the blue light is steady.
- Cell phone two (play background sound use): Take out the transmitter and long-press the power button for 2 seconds, the connection icon will flash, and the product will automatically connect. Open the cell phone Bluetooth and find the device name “Q9” to connect. A steady blue light indicates successful connection.
2. Wear:
The optimal placement for the product is on the collar. Use the back clip to attach it to the collar or use the magnet by placing the clip magnet on the back of the collar and securing the TX to the front of the collar with the magnet.
3. Functions:
- MIC OFF: Click the button; the transmitter indicator will light up to turn off the microphone. The indicator will turn off to turn the microphone back on.
- Noise Reduction: Clicking the button will light up the transmitter indicator, turning noise reduction on. The indicator will turn off to disable noise reduction. A remote control can adjust the noise reduction levels from L1 to L5.
- Remote Control: Click the remote control buttons for sound adjustments, effect tones, and other functions.
Specifications:
| Specification Description | |
| 2.4G Chip | WS300A |
| Bluetooth Support Protocol | A2DP, AVRCP, HFP |
| Audio Decoding Method | LBC |
| Receiving Distance | Face to face: 30m; Turn around: 80m |
| Operating Frequency | 2.402GHz – 2.480GHz |
| Transmission Power | MAX 10 dBm |
| Charging Input Voltage | DC 5V ± 0.25V |
| Operating Voltage | 3.7V (3.3-4.2V) |
| Charge Cutoff Current | 30 mA |
| Charging Current | 160 mA |
| Auto Power Off Time | >3 minutes |
| Low Voltage Alert | 3.5V |
| Low Battery Shutdown | 3.3V |
| Pair Name | Q9 |
| Sensitivity | 96 ± 3 dB |
| Frequency Range | 20Hz – 20kHz |
| Chip DAC Signal-to-Noise Ratio | > 106 dB |
| Distortion | < 1.0% |
| Delay | 25 ms |
| Operating Current | < 33 mA |
| Hours of Work | 5-6 hours per single transmitter; 60 hours with charging compartment |
| Shutdown Current | 10 µA |
| Charge Length | 1 hour 20 minutes |
RX Specifications
| Specification Details | |
| 2.4G Chip | WS300A |
| Bluetooth Support Protocol | A2DP, AVRCP, HFP |
| Audio Decoding Method | LBC |
| Receiving Distance | Face to face 30m; Turn around 80m |
| Operating Frequency | 2.402GHz – 2.480GHz |
| Transmission Power | MAX 10dBm |
| Charging Input Voltage | DC 5V ± 0.25V |
| Operating Voltage | 3.7V (3.3-4.2V) |
| Charge Cutoff Current | 30mA |
| Charging Current | 160mA |
| Auto Power Off Time | > 3 min |
| Low Voltage Alert | 3.5V |
| Low Battery Shutdown | 3.3V |
| Pair Name | Q9 |
| Sensitivity | 96 ± 3 dB |
| Frequency Range | 207 Hz – 20 kHz |
| Chip DAC Signal-to-Noise Ratio | > 106 dB |
| Distortion | < 1.0% |
| Delay | = 25 ms |
| Operating Current | < 33 mA |
| Hours of Work | 5-6 hours for a single transmitter; 60 hours with charging compartment |
| Shutdown Current | = 10 μA |
| Charge Length | 1h 20min |
Frequently Asked Questions
1. Does the microphone automatically turn on and connect?
The microphone automatically turns off and charges when placed in the charging compartment. It turns on when removed and plugged into the receiver. The 2.4G connection will auto-connect, but Bluetooth requires initial pairing and will auto-connect to previously paired devices.
2. Can listening be achieved with a 2.4G connection alone?
Yes, listening is possible with a 2.4G connection. However, to record sound and music simultaneously, both 2.4G and Bluetooth connections are necessary.
Technical Support
If you have any questions or need assistance, please contact us at: E-mail: [email protected]
Security Information
- Use Environment: Avoid using in humid or hot environments to prevent equipment damage. Keep it away from heat sources like electric heaters or direct sunlight.
- Charging Caution: Use only the supplied or a compatible charging case. Keep the charger and device away from water to prevent short circuits or electric shocks.
- Privacy: Wireless microphones may have signal interference risks, so be aware of the surrounding environment to prevent sensitive information leakage.
- Electromagnetic Radiation: The device emits low wireless transmission power, significantly lower than ordinary cell phones, and is safe for extended use.
- Troubleshooting: If the device is hot, smoky, or noisy, stop using immediately and contact technical support.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received.
Any changes not approved by the responsible party could void the user’s authority to operate the equipment. This device complies with FCC limits for a Class B digital device, which provides reasonable protection against harmful interference when used in a residential installation.