SP-0161 SOUND TOP WIRELESS SPEAKER IM

Size: 322.5(w) x 100(h) mm

WIRELESS SPEAKER

Instruction Manual

Thank you for purchasing the Sound Top Wireless Table Speaker.

This manual provides more information about this wireless speaker,

please read the instructions before using.

 

 

Product Overview

 

LED Indicator

1. Power On/Off Button
2. Mode Button (Speaker/FM Radio)
3. USB Type-C Charging Port
4. Volume Down/Previous Sound Button
5. Volume Up/Next Sound Button

Package Contents

1. Sound Top Wireless Speaker x 1
2. USB Type-C Charging Cable x 1
3. Leg x 4
4. Instruction Manual x 1
5. EVA Sticker x 8

Technical Specification

1. Driver Diameter: 100 mm
2. USB Type-C Charging Cable, Length: 50 cm
3. Impedance: 3 Ohms (Included)
4. Power Supply: DC 5V/1A with FM Radio Function
5. Battery: Li-ion Battery 3.7V 2600 mAh
6. Playtime: 4.5-5 Hours at 5V/1A Max
7. Charging Time: 4-5 Hours
8. Bluetooth Range: 32.8 Feet Maximum
9. Bluetooth Version: 5.3

How To Assemble

Power On/Off

Power On

Press and hold the Power Button for 2 seconds.

Power Off

Press and hold the Power Button for 2 seconds.

Note: Always power off the speaker when not in use.

Pair Wireless Speaker with Your Mobile Device

1. Ensure the distance between your wireless speaker and mobile phone (or other devices) remains within 32.8 feet.
2. Power on the wireless speaker.
3. Activate the Bluetooth function on your phone within range and select “SP-0162 SPK” from the list shown.
4. You will hear a beep sound when pairing is successful.

Reconnect Wireless Speaker to Your Mobile Device

When powered on, the wireless speaker will automatically connect with the last successfully paired device.

Change the Mode for the Wireless Speaker

Press the “MODE” Button once to switch to FM Radio mode. Press the “MODE” Button again to switch back to Bluetooth mode.

FM Radio

Auto Scan All Channels

Press the Power Button once.

Next Channel

Press the Up Button once.

Previous Channel

Press the Down Button once.

Volume Up

Press and hold the Up Button.

Volume Down

Press and hold the Down Button.

Charging Your Wireless Speaker

For your safety, please always use an appropriate 5V input charger or adapter to charge the product. Do not use a Quick Charging USB Adapter to charge the product, as it might damage the product.

1. Use the USB Type-C charging cable provided with this wireless speaker.
2. Connect the USB Type-C plug to the USB Type-C charging port on the speaker. Then, connect the USB plug to a USB port on a wall adapter to begin charging.
3. The LED indicator will turn orange while charging and will turn off once fully charged.

Note:

1. You must select a qualified charger from a regular manufacturer.
2. You must charge the wireless speaker if it has not been used for more than 6 months.

 

 

PDF

2adm5_sp_0162_usersmanual_7876911_67f5fa671e