Table of Contents
Havit Gamenote Fuxi-H7 Gaming Headphones User Guide
Havit Gamenote Fuxi-H7 Gaming Headphones User Guide
FCC: 2AI6I-FUXIH7D
Headphone Specification
Speaker: Φ40mm
Impedance: 32+15%Ω
Sensitivity: 110±3dB
Frequency response: 20Hz to 20kHz
Microphone: Ø6.0%2.7mm
Microphone sensitivity: -42±3dB
Wireless distance: 10m
Plug: 2.4GHz(Type-C+USB)+Wireless+Type-C Audio cable+3.5mm Audio cable lithium battery: 750mAh
Charging time: about 2H
Charging method: (Type-C) USB 5V
Low latency 28MS
Size: 86*173*201mm
product weight: 247g
Continuity Play: 2.4G: 30H(No backlight),20H(brightest backlight); pon, —
Wireless: 43H(No backlight),26H (brightest backlight) 4 ya
Function Image
Operation Guide
Wired mode(Type-c Audio cable)
- Plug inthe TYPE-C cable, and long press the power switch to turn on the headphone. At this time, the headphone is in wired mode (Note: In wireless mode, plugging inthe TYPE-C cable for charging and playing at the same time; In 2.4G mode, plugging inthe TYPE-C cable can directly switch to wired mode. And after unplugging the cable, it will automatically switch to 2.4G mode)
- Short/Long press the volume+/- for volume adjustment.Double click volume +/- for up/down song adjustment.
- The microphone is turned on by default. To turn off the microphone, press the microphone key once (voice prompt is “beep beep”). To turn on the microphone, press the microphone key again (voice promptis “beep”)
- The headset defaults to stereo sound. Short press 7.1 key to switch to virtual 7.1 channel (voice prompts “beep beep”), press again to switch back to stereo (voice prompt is “beep”).
Wired mode(3.5mm Audio cable)
- Plug and play: Connecting the headphone to a music player with the provided dual 3.5mm audio cable, the headphone can be used as wired headphone without starting.
- In this mode, you can’t use any function of the headphone, including pause playback, volume adjustment, microphone and soon.
2.4G mode(USB&Type-C)
How to Match
- Turn off the headphones and remove the transmitter.
- Press the power button to turn on the headphone, and the indicator lights up and flashes slowly. Then double- click the power button switch to “Gaming Mode”;
- Turn on the 2.4G receiver (plug the receiver into PC, PS4, Android phone and other devices)
- The headphone and receiver are automatically paired and the indicator lights up (for headphone that have already been paired).
Operating Instructions
- Connect the receiver to PC/PS4/Android phone or other devices, the indicator lights up and flashes.
- Turn on the headphone, it will automatically pair to the transmitter. The indicator will be always on after the pairing is successful.
- Short/Long press the volume+/- for volume adjustment.Double click volume +/- for up/down song adjustment.
- The microphone is turned on by default. To turn off the microphone, press the microphone key once (voice promptis “beep beep”). To turn on the microphone, press the microphone key again (voice prompts “beep”)
- The headset defaults to stereo sound. Short press 7.1 key to switch to virtual 7.1 channel (voice prompt is “beep beep”), press again to switch back to stereo (voice prompt is “beep”). (See 2.4GHz Ul below for specific operations).
- Low Power Mode:When the battery power supply voltage is less than 3.30V, the sound will beep one times every one minute.
- Power off mode:when the battery power supply voltage is less than 3.25V or when there is no sound source connection the with 10 minutes, the headset will turn off.
Wireless mode
- Turn on the headphone, double-click the power button switch to wireless mode, and you can hear the voice prompt:”Wireless mode”. When the headphone enter the pairing mode, the indicator will flash and voice prompt is “power on”;
- This headphone is compatible with most of smart phones and other devices that support wireless headphone protocol.
- Turn on your phone and enter wireless mode. Then search “Fuxi-H7” for paring.
- Click “Fuxi-H7” to pair. After pairing is successful, the voice prompt is “connected”, and the indicator will be always on. (If the device have been paired before, the headphone will automatically connect with it under Wireless mode.)
Key Function
Answer an incoming call
Short press the power button to answer the incoming call.
Tip: As some mobile phones answer calls through their own receivers by default, please refer to your mobile phone instructions and set them on your mobile phone.
End current call
Short press the power button to end the current call.
Refuse to answer the phone
When there is an incoming call, press the power button for 1.5 seconds.
Play music
- Play/Pause: short press the power button.
- Previous song: Double-click “Volume-“to previous song.
- Next song: Double-click “Volume+”for the next song.
- Volume+: Short/long press “Volume+”to increase the volume.
- Volume-: Short/long press “Volume-“to decrease the volume. (See the wireless Ul below for details.)
Warnings
- Please follow the instruction to operate
- PLS charge the headphone with input power below 3.3V, in order to protect the battery;
- Please store or use the headphone in a normal temperature environment.
- PLS keep the headphone from heat source, such as radiators, hot air regulators, stoves, or other heat generating instruments. As itis not anti-high temperature.
- Don’t jam the ports of the headphone, such as charger port, LED port and microphone etc..
- In order to protect your hearing and extend the headphone service life, itis not recommended to adjust the volume to the maximum level for a long time.
- Whatever reasons damage the headphone, please feel free to contact our after-sales staff in time rather than repair by yourself. Otherwise, you will accept without after-sales service.
