HS-BT333
Wireless
Soundbar Speaker
User Manual
Table of Contents
Specification
- Product Name: Wireless Soundbar Speaker
- Functions: BT/TF/USB/AUX-In/FM/RGB/TWS
- BT Version: AB5.3
- Rated Power: 5W x 2
- Playing Time: Approximately 2 hours
- Transmission Distance: 10M
- Horn Size: 52mm x 2
- Impedance: 4 ohms
- Battery Capacity: 1500mAh
- Charging Time: Approximately 4 hours
- Charging Voltage: Type-C USB, DC 5V, 500mA
- Frequency Response: 100Hz – 20KHz
- Material: PP + Iron Net
- Product Size: 408(L) x 85(W) x 76(H) mm
- Weight: 725g
- Packing List
Components & Functions
Please kindly check the function indicator before using the speaker system:
- Play/Pause: Click to play or pause the audio.
- FM Mode: Long press to automatically search for channels.
- Call Function:Click to answer or hang up a call.
- Long press to refuse an incoming call.
- Double click to make a call.
HS-BT333 User Manual Summary
I. BT Mode
- BT Version: 5.3; supports HSP, A2DP, AVRCP profiles with voice prompts.
- Pairing Name: HS-BT333.
- Power on the speaker using the volume knob; blue light indicates pairing status, connect to “HS-BT333”, and use “0000” if prompted for a password.
- Once connected, future connections will auto-pair.
II. AUX Mode
- Connect via a 3.5mm aux cable to enter AUX mode with voice prompts.
- The blue indicator light remains on in AUX mode.
III. Charging Mode
- Charge using the provided cable or a 5V adapter.
- Red light is on during charging; turns off when fully charged.
IV. Low Battery Protection
- Battery below 3.3V issues a warning; below 3.1V, it issues a warning and shuts down.
V. TWS Setting
- Pair two speakers by placing them within 1m and switching on.
- Press the pause button on one speaker for pairing; voice prompt will confirm.
VI. Disable TWS Setting
- Switch the mode to TF or FM to disconnect TWS.
- Return to BT mode to reconnect automatically.
FCC Warning
This device complies with part 15 of the FCC Rules, which address radio interference. Any modifications not approved may void the user’s authority to operate the equipment. Ensure compliance with FCC’s RF exposure requirements.