Bluetooth Headphone User Manual

Bluetooth Headphone User Manual

Bone Conduction Bluetooth Headphone User Manual

(2AXV7-X16)

Instructions

1. Indicator light
2.  Microphone
3. Volume ” — ” button
4. On/Off button
5. Volume ” + ” button
6. Charging port

Charge

The headphone uses a built-in rechargeable battery , the first use of the headphone must be fully charged to the battery .In use , if the voice promps “low battery”, the battery is low, and you need to charge the headphone.

The charging cable should be connected to the headphone magnetic charging port, about 2 hours to be fully charged. The charging status: Red light always on), full charge is always on the blue light.

Note: Magnetic charging has a positive and negative polarity correspondence, mutual adsorption can be charged normally, and mutual repulsion will not charge or even cause a short circuit.

Warning: The rechargeable battery of this product must] be disposed of properly for recycling. Please do not put the battery into the fire ,so as not to cause an explosion |

Operating instruction

Function	Operation	Indicator
On	Press and hold (3) (around 3-5 seconds)	Light on
Off	Press and hold (3) (around 3-5 seconds)	Light off

Music Play

Function	Headphone Status	Operation
Increase volume	Play music	click “+”
Reduce volume	Play music	click “-“
Previous song	Play music	Long press for 1s “-”
Next song	Play music	Long press for 1s “ +”
Pause	Play music	Click the on/off button
Resume	Pause	Click the on/off button

Answer the phone

Function	Headphone Status	Operation
Answer or hang up the call	Incoming call	Short press the power button
Decline the call	Incoming call	Long press the power button for 2 second to hang up
volume control	During call	click “+” / “-“
Phone/Bluetooth headset switch	During call	Long press and hold the power on button for 1 second

Operating instruction

How to pair with Bluetooth

Bluetooth pairing: In the off state, press and hold the power button for 2 seconds, the light into the red and blue flashing state, and then enter the pairing state. Turn on the Bluetooth (cell phone/computer) on the device and search for he device name ” X16 “, click the device” X16 “to pair and connect.

Bluetooth / MP3 mode switching: Double click the power button (multi-function composite button) to freely switch between Bluetooth and memory mode.

Emphasis: The power on automatically default Bluetooth mode status.

Song download(USB name:X16): Connect the original charging data cable to the computer and headset to read Take a USB flash drive and copy the computer song to the USB flash drive

TF card playback mode switch: When playing audio in TF card mode, triple-click ‘POWER’ to switch between shuffle and sequential playback modes (with memory function)

Warm tip: Bluetooth headphone will automatically search for the latest device to connect after powering on. When the Bluetooth headphone and the device deviate from the effective distance of 10 meters (33 feet), the Bluetooth headphone will be disconnected from the device, and they will be reconnected only when they are placed within 10 meters again, if theBluetooth headphone is disconnected from the device for too long, then you need to click the multi-function button on the Bluetooth headphone to reconnect.

Al intelligent voice control

Function	headphone status	Operation
Video Control	Bluetooth is connected	Long press for “On/Off ” 1s to release

Note: In the Bluetooth connection status, press and hold “On/Off” for 1s to release your hand. After hearing the prompt, you can voice control the phone, saving time to operate the phone, fast and smart.

For example: You can directly control the earphone and ask:

What time is it now…… Today’s weather……

Navigate to Taipei 101……Call someone ……..

Smart exercise, easy and full of fun

Indicator

Charging	Red light (always on)
Charging completed	Blue light (always on)
Search for pairing	Flash in red and blue alternately
Bluetooth music playback	Blue light flashes once every 5 sec.

Product parameter

• Version: 5.4
• Input: 5V/130mA
• Charging time: About 2 hours
• Distance: Bluetooth 10 meter
• Battery: 170mAh
• Play: =5 hours@65% volume
• Agreement: AVRCP_V1.6.2/HFP_V1.7.2/A2DP_V1.2 Bluetooth communication protocol
• Music format support: MP3,WAV,WMA, APE FLAC,AAC,M4A
• Waterproof grade: IPX8

Maintenance and cleaning.

• The headphone can not soak seawater/salt water for a long time, they use fresh water to rinse and dry. Charging electromagnetic suction part is easy to corrode.
• If not used for a long time, please at least once a month full charge.
• Please do not disassemble any parts of the product, such as the discovery of product defects immediately stop using the product, and contact the seller after-sales service.
• After each campaign, please wipe the surface of the headphone water, especially the location of the filling electromagnetic suction, to deal with the cleaning in time to prevent sweat, and salt water corrosion charging port, affecting the life of the product.
• Keep the product away from fire ,heat, freezing sources, chemicals, violent impact disassembly and extrusion products are strictly prohibited .
• Please use a charging head with an output of 5V1A or less .