Table of Contents

JBL Wave Beam 2 True Wireless Earbuds User Manual

Product Usage Instructions

Try different sizes (S/M/L) for a perfect fit and audio performance.
Power on the device.
Connect to your desired device following the provided instructions.
Dual Connect allows you to switch between stereo and mono modes.
Multi-Point Connection enables connecting up to 2 devices simultaneously.
Enable advanced controls like ANC, Ambient Aware, and TalkThru by connecting the device to the JBL Headphones app.
Voice commands such as VoiceAware are available for enhanced usability.
The LED indicators display different statuses:
Charging (White), Fully charged (White), BT connecting/connected/not connected (Blue), and battery levels (Red/Orange/Green).
The JBL Headphones app provides additional control and personalization features for an enhanced listening experience.

Q: How do I know when the earbuds are fully charged?
A: The LED indicator will show a solid white light when the earbuds are fully charged.
Q: Can I use the earbuds while they are charging?
A: Yes, you can use the earbuds while they are charging, but ensure they are adequately charged for uninterrupted usage.

APP

Get even more control and personalization o f your listening experience with this free app.

DUAL CONNECT

MULTI-POINT CONNECTION

Enable advanced controls by connecting your JBL WAVE BEAM 2 to the JBL Headphones app.

VOICEAWARE

POWER OFF

DO MORE WITH THE APP

CHARGING

LED BEHAVIORS

Model: WAVE BEAM 2
Driver size: 8 mm/ 0.3” Dynamic Driver
Power supply: 5V 1A
Earbud: 4.3 g per pc (8.6 g combined) 0.0095 lbs per pc (0.019 lbs combined)
Charging case: 41 g/ 0.09 lbs
Earbud battery type: Lithium-ion battery (50 mAh/ 3.85 V)
Charging case battery type: Lithium-ion battery ( 550 mAh/ 3.7 V)
Charging time: 2 hrs from empty
Music playtime with BT on and ANC off: Up to 10 hrs
Music playtime with BT on and ANC on: Up to 8 hrs
Talk time with ANC off: Up to 6 hrs
Talk time with ANC on: Up to 5.5 hrs
Frequency response: 20 Hz – 20 kHz
Impedance: 16 ohm
Sensitivity: 100 dB SPL@1 kHz
Maximum SPL: 95 dB
Microphone sensitivity: -38 dBV/Pa@1 kHz
Bluetooth version: 5.3
Bluetooth profile version: A2DP V1.4, AVRCP V1.6.2, HFP V1.8
Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power: <12 dBm (EIRP)
Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
Maximum operation temperature: 45 °C

To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
The power delivered by the charger must be between min 2.5 Watts required by the radio equipment, and max 5 Watts to achieve the maximum charging speed.

WARNING