Table of Contents
AQIRYS M32 & M60
ATTENTION!
Please, remove the skates’ protecting film before starting using the mouse.
M32 Mouse Specifications
| Feature Specification | |
| Operating Distance | 8-10 m |
| Sensor | PixArt 3311 |
| Sensitivity | 12000 DPI |
| Polling Rate | 1000 Hz |
| Maximum Tracking Speed | 300 ips |
| Maximum Acceleration | 35G |
| Hardware Acceleration | None |
| Button Switch | Huano (20 million presses) |
| Scroll Encoder | Kailh GE 2.0 |
| Weight | 58 g |
| Battery | 300 mAh |
| Interface | USB 2.0 |
| Transmission Range | 10 m |
| Operating Voltage | 5 V |
| Operating Current | 14 – 27 mA |
M60 Mouse Specifications
| Feature Specification | |
| Operating Distance | 8-10 meters |
| Sensor | PixArt 3395 |
| Sensitivity | 26,000 DPI |
| Polling Rate | 4,000 Hz |
| Max. Tracking Speed | 650 ips |
| Max. Acceleration | 50G |
| Hardware Acceleration | No |
| Buttons Switch | Kailh GM 8.0 (80 million clicks) |
| Scroll Encoder | Kailh GE 2.0 |
| Weight | 58 grams |
| Battery | 300 mAh |
| Interface | USB Type-C to USB 2.0 |
| Transmission Range | 10 meters |
| Operating Voltage | 5V |
| Operating Current | 14 – 27 mA |
M32 Packing List
- Wireless Mouse
- Charging Dock with USB Ports
- USB Type-C Charging Cable
- User Manual
- Wireless Receiver
- Spare PTFE Skates
M60 Packing List
- Wireless Mouse
- Charging Dock and Wireless Receiver
- USB Type-C Charging Cable
- User Manual
- Spare PTFE Skates
Button list
1. Lett Button
2. Right Button
3. Scroll Wheel
4. DPI Notification Led
5. Side Button 1
6. Side Button 2
7. 2.4GHz Mode
8. OFF
9. Bluetooth Mode
10. DPI Button
11. Charging Port
12. Wireless Transmitter
13. Charging pins
14. USB Port
15. USB Type-C Port
16. Backlight Button
Wireless Mouse Connection
1. Initializing the Mouse:
Switch on the mouse by moving the button from position 8 (OFF) to position 7 (2.4GHz) or position 9 (BT) to choose a connection mode.
2. Initial Connection:
For first-time setup, connect the mouse to a Bluetooth device and the included wireless transmitter.
3. Connecting to a Bluetooth Device:
- Activate Bluetooth on your device.
- Search for “AQIRYS M32 Mouse” or “AQIRYS M60 Mouse” and select it to connect.
- A successful connection is indicated by the notification LED lighting up blue.
4. Connecting to a New Bluetooth Device:
- Press buttons 1, 2, and 3 together for 3 seconds to enter pairing mode.
- Locate “AQIRYS M32 Mouse” or “AQIRYS M60 Mouse” in your device’s Bluetooth settings and select it to connect.
- The notification LED will light up blue once connected.
5. Connecting via 2.4 GHz Mode:
- Connect the 2.4 GHz transmitter from the M32 mouse base to a USB 2.0 port. Use the provided dock to minimize distance between the receiver and mouse. (For M60, use the charging dock as it also acts as a transmitter.)
- The 2.4 GHz transmitter will enter Pairing mode automatically.
- Connection is automatic, indicated by the notification LED turning red.
6. Switching Connection Modes:
Switch the selector button on the mouse to position 7 for a 2.4GHz connection or position 9 for Bluetooth to change modes.
7. Dedicated Software:
For advanced configurations, download the dedicated software from the product page:
Summary
Subsequent Connections
Once initially paired, connections between the receiver and mouse will occur automatically.
Wireless Receiver Power On/Off
The receiver powers on/off automatically when connected/disconnected from the USB port.
Wired Mouse Connection
When connected to the included cable, the mouse will switch to wired mode and start charging.
Auto Disconnect and Reconnect
The mouse enters energy-saving mode after 30 seconds of inactivity and deep sleep mode after 10 minutes. Reactivate by moving the mouse or pressing any main button.
Dock RGB Illumination
To change the dock’s lighting mode, press the button at its base, identified as number 16 in the manual.
Battery Level
Check the battery level using the dedicated software.
Battery Charging
Charge the mouse either by placing it on the dock for approximately 1.5 hours or by using the USB Type-C cable provided, which allows you to use the mouse while charging.
Recommendations
- Run a complete battery charge cycle before first use.
- Use 5V/1A or 5V/2A chargers; higher voltages may cause damage.
- If not used for over 3 months, charge the battery before use.
- Run a complete charge cycle every 3 months if unused for an extended period.
Skates Replacement
Information on skates replacement was included but needs details for further guidance.
To replace PTFE mouse feet, first remove the old feet and clean the surface with isopropyl alcohol to eliminate residue and dirt. Then, apply the new feet, ensuring correct alignment and firm adherence.