inateck
Instruction Manual
BK2007-13 Keyboard
Product Diagram
Table of Contents
Bluetooth Pairing
Step 1:
For first-time use, snapping the protective case onto the magnetic strip will turn the keyboard on and automatically enter Bluetooth pairing mode. For future use, press the “+” button to enter Bluetooth pairing mode. The Bluetooth indicator will blink once it successfully enters pairing mode.
Step 2:
On the iPad, select Settings > Bluetooth > On. Then, “Inateck BK2007-13” will appear under “Other Devices”.
Step 3:
Tap “Inateck BK2007-13” to pair it with your iPad. The Bluetooth indicator will stay solid for a few seconds, indicating that Bluetooth pairing is completed.
Fix Bluetooth Pairing Problems
Step 1:
Go to Settings > Bluetooth, find “Inateck BK2007-13” in “My Devices”, and tap the information button next to it. Then, tap Forget This Device. If there are multiple pairing records related to the keyboard, please clear all of them.
Step 2:
Hold the “+” button simultaneously for 3 seconds. The three indicators will blink 3 times once the factory reset is completed.
Step 3:
Pair it again with your Inateck BK2007-13.
| Shortcut Keys |
| osc fume [0 Jewwer [6 [wwe | |
| Q en (Reem | © | swore |
| Wet O06 ew |
| Ome [0 [om [Oem | |
| ER CE SR |
| 2. Common Keyboard Shortcuts |
| 3. LED Indicator | ||
| Caps Lock Indicator | White Light Off | Caps Lock is off |
| Bluetooth Indicator | Blinking | Non-Charging: Battery level < 20% |
| Battery Indicator | – | Red |
4. Restore Factory Defaults
Hold the + (2) buttons simultaneously for 3 seconds. The three indicators will blink three times once the factory reset is completed.
5. Check Battery Level
Hold the + buttons simultaneously to check the battery level. The red battery indicator will blink, indicating the battery level based on the frequency.
6. Charging
When the battery level falls below 20%, the battery indicator will blink in red. Please use the included USB cable to recharge the keyboard promptly. The recommended charging voltage is 5V. The keyboard will be fully charged in 2 hours. The red battery indicator will remain solid while the keyboard is charging. Once fully charged, the green battery indicator will stay solid.
7. Sleep Mode
When the BK2007-13 is left idle for 30 minutes, it will enter sleep mode, and the Bluetooth connection will be disrupted. The connection can be reestablished by pressing any key.
8. Product Specification
9.Packing List
| BK2007-13 | 1 |
| Charging Cable | 1 |
| Instruction Manual | 1 |