SHENZHEN JIUHU TECHNOLOGY JH926C Headphone User Manual

Product function instructions

Call/EQ switch
Volume up/Next song
Volume down/Previous song
power on/off, Music play/pause,LED light on/off
Type-C charging port
Bluetooth indicator,charging indicator
3.5mm jack
Microphone

Product operation instructions

Power on/off

Power on:Press and hold “” around 2 seconds until the blue indicator will be on 3 seconds ,then the red and blue indicator blinks alternately,it will be pairing status;

Power off:Press and hold “” around 2 seconds ,the red indicator will be on around 1 seconds and goes off.

Pairing

Turn on the Bluetooth switch of the mobile phone or other devices (such as PC, Tablet etc), and enter into the Bluetooth list ,search for the pairing name “JH-926C”;

When seeing the pairing name “JH-926C” on the list,click it to connect the headset with your device. Once paired successfully, the blue indicator blinks every 6 seconds.

EQ mode switch

There are 3 different EQ modes for option, they are :Bass mode,Pop mode and vocal mode.

When playing music,click the (1) button to switch different EQ mode.

Music playing

Volume up: Click the (2) button to increase volume

Volume down: Click the (3) button to decrease volume

Next song: Press and hold the (2) button around 2 seconds

Previous song: Press and hold the (3) button around 2 seconds

Music play/pause: Click the (4) button

Calling (Mobile)

Answer call:Click the (1) button when call is coming

End call:Click the (1) button when call is over

Cancel call:Click the (1) button when calling

Reject call: Press and hold the (1) button around 2 seconds when call is coming

Redial:Double click the (1) button to redial last call number

Reset:

Press and hold the “+” and ”-” button at the same time around 3 seconds until the red and blue indicator blinks alternately.

Siri or google assistant:

In standby mode or music mode, doube click the (1) button around 2 seconds

Low battery alert: The red indicator will blinks slowly with voice tone “didi”

LED light on/off

The LED light will be on once turn on the headphone;

The LED light can be off by long press the (1) button

Bluetooth indicator instruction

Connect successfully	The blue indicator blinks every 6 seconds
Pairing Status	The red and blue indicator blink alternately
Reset	The red and blue indicator blink alternately
Listen to music	The blue indicator blinks every 6 seconds
Charge fully	The indicator will be solid blue
Power off	The red indicator will be on around 1 second then goes off
Charging	The indicator will be solid red

AUX mode

Connect one end of the 3.5mm audio cable into the audio jack of the headset;

Connect the other end into your mobile or other devices,then can play music

PS: The headphone will be power off once plug the 3.5mm audio cable into audio jack(When headphone is power on),the 3.5mm audio cable must be taken out from the headphone if need to turn on the headphone

Charging instruction

Before using,please check and assure the battery is enough.

While the headphone is in low battery, please use Type-C charging cable to charge and the charging indicator will be red when charging. Once it’s fully charged,the indicator will be solid blue.

Technical parameters

Model name	JH-926C
Bluetooth version	V5.3
Working distance	>10m
Frequency response	2402-2480MHz
Input Voltage	DC 5V,0.5A
Charging time	About 2H
Charging port	Type-C
Speaker driver unit	Φ 40mm, 32Ω

FAQ

Headphone can’t be turned on

Please ensure the battery is enough.

Pairing failure

Please ensure the headphone is in power on and pairing status, and the mobile or other device locates within 1 m range;

And then redo again.

Connect automatically

The headphone will automatically connect the mobile or other devices which used last time

Sound cut off/stuck

Check whether the mobile or other devices locates valid range (10m) and whether there are obstacles between the headphone and mobile .

Charging way

Please ensure the charging adaptor is DC 5V/1A,or Car charger or power bank to charge the headphone.