SHENZHEN JIUHU TECHNOLOGY JH927 Headphone User Manual

Product function instructions

“EQ”: voice assistant
“+”: Volume up/next song
“-”: Volume down/Previous song
Power on/off
Bluetooth instruction
Type C charging port
3.5mm jack cable
Microphone

Product operation instructions

Power on/off

Turn on: In power-off status, press and hold the power on button 2s, the blue light will be on around 2 seconds,then blue and red light will blink alternately, the headphone enter into pairing mode.
Turn off: In power-on status, press and hold the power off button 3s, the indicator light will goes off then.

Pairing

Turn on the Bluetooth switch of the mobile phone or other devices(such as PC Tablet etc), and enter into the Bluetooth list ,search for the pairing name “JH-927”;

When seeing the pairing name “JH-927” on the list,click it to connect the headset with your device; Once paired successfully, the blue indicator blinks every 6 seconds.

Music playing

Volume up: Click the “+” button to increase volume

Volume down: Click the “-” button to decrease volume

Next song: Press and hold the “+” button around 2 seconds

Previous song: Press and hold the “-” button around 2 seconds

Music play/pause: Click the MFB button

Calling (Mobile)

Answer call:Click the MFB button when call is coming

End call:Click the MFB button when call is over

Cancel call:Click the MFB button when calling

Reject call: Press and hold the MFB button around 2 seconds when call is coming

Redial:Double click the MFB button to redial last call number

Reset:

Press and hold the “+” and ”-” button at the same time around 3 seconds until the red and blue indicator blink alternately.

Siri or google assistant:

In standby mode or music mode, long press EQ button 2 seconds to activate Siri or Google assistant.

Bluetooth indicator instruction

Connect successfully	The blue indicator blinks every 6 seconds
Pairing status	The red and blue indicator blink alternately
Reset	The red and blue indicator blink alternately
Listen to music	The blue indicator blinks every 6 seconds
Charge fully	The indicator will be solid blue
Power off	The red indicator will goes off
Charging	The indicator will be solid red

AUX mode

Connect one end of the 3.5mm audio cable into the audio jack of the headset;

Connect the other end into your mobile or other devices,then can play music directly.

Note: The headphone will be power off once plug the 3.5mm audio cable into audio jack(When headphone is power on). if you need to turn on the headphone, the 3.5mm audio cable must be taken out from the headphone.

Charging instruction

Before using, please check and assure the battery is enough.

While the headphone is in low battery, please use Type-C charging cable to charge and the charging indicator will be red when charging. Once it’s fully charged,the indicator will be solid blue.

Technical parameters

Model name	JH-927
Bluetooth version	V5.3
Working distance	≥10m
Frequency response	2402-2480MHz
Input Voltage	5V,1A
Charging time	Around 2H
Charging port	Type-C
Speaker driver unit	Φ 40mm, 32Ω

FAQ

Headphone can’t be turned on

Please ensure the battery is enough.

Pairing failure

Please ensure the headphone is in power on and pairing status, and the mobile or other device locates within 1 m range;

And then redo again.

Connect automatically

The headphone will automatically connect the mobile or other devices which used last time

Sound cut off/stuck

Check whether the mobile or other devices locates valid range (10m) and whether there are obstacles between the headphone and mobile .

Charging way

Please ensure the charging adapter is DC 5V/1A,or Car charger or power bank to charge the headphone.