Table of Contents

Fachixy FC200 Wireless Gaming Headset User Manual

Shenzhen wei bo technology Wireless Gaming Headset User Manual

2BATE-FC-200

Package Contents

Wireless Headset*1

User Manual*1

Charging Cable*1

USB Dongle*1

Product Features

Versatile Connectivity: Seamlessly switch between Bluetooth, 2.4GHz.
Ultra-Low Delay, Maximum Excitement: Delight in low latency for precise, immersive audio.
Ultimate Comfort: Lightweight, foldable, and ergonomic design ensures extended comfort during wear
Gaming Without Limits: Enjoy up to 50 hours of playtime with just a 2.5 hour charge.
Vibrant Gaming Ambience: Captivating lighting effects to enhance the gaming experience for passionate gamers.

Before Using: Charging

Note:

Before using the wireless gaming headset for the first time, please charge it for at least 2 hours.
Please refrain from using high-power or low-quality chargers to charge the gaming headsets.
When the battery level falls below 10%, you will hear a“Low Battery voice prompt.
The red LED will indicate that the wireless headset is charging Once fully charged, the LED will turn green.

Product Overview

Turn on — Long press 3s;

Turn off — Long press 4s;

Voice prompt: “Power on”/Power off’

Play/Pause — Single click

Previous track — Tripple clicks

Next track — Double clicks

Answer/Hang up call — Single click;

Voice prompt: “Di Di

Reject call — Long press 2s

Voice prompt: “Di~“

Volume Control

Microphone on/off — Single click;

Voice prompt: “Microphone on”/”Microphone off”

Bluetooth mode s 2.4G Dongle mode — Long press 2S

Turn on/off RGB — Single click; Voice prompt:“RGB on”/“RGB off”

Game mode S Music mode —- Double clicks;

Voice prompt: “Game mode”/“Music mode”

Re-pairing (Bluetooth mode) -— Long press 3s;

Voice prompt: “Pairing”with Flashing blue light

How to use these two modes

Neither mode is available on Xbox.
Compatible Devices: PS5, PS4, PC,Mac, Laptop, mobile, Nintendo Switch (invalid Microphone)

Bluetooth Mode

Delays < 48ms
Compatible with PC/Mac/Nintendo Switch/Mobile;
Bluetooth mode employs 5.4 Bluetooth technology to establish a wireless connection with devices, allowing you the freedom to move while enjoying audio.

Turn on the headset and enable Bluetooth on your device (Computer, Mobileohone, Mac Nintendo Switch) .Set it to discoverable mode and search for new devices.Find“FC-200″ in the searched device list and click to pair.
Bluetooth mode Voice Prompt & LED Light:

“Bluetooth Mode”: Flashing Blue light
“Bluetooth Connected”: Breathing Blue light

2.4GHz Dongle Mode

Delays < 24ms (Ultra Low Latency)
Compatible with PC/PS4/PS5; If you’re using USB dongle to connect a Mac or Nintendo Switch, you’ll need a USB-A to USB-C adapter (package not included).
2.4GHz wi reless dongle delivers a more stable Signal and reduced latency.

Plug the USB 2.4GHz dongle into the C port of your device (PC, PS4, PS5), then turn on the headset, find “Wireless Gaming Headset” in the Output Devices in the Sound Settings and click on Pairing. While waiting for pairing, the LED will be green and blinking slowly.
2.4G Dongle Mode Voice Prompt & LED Light

“Dongle Mode”: Flashing Green light
“Dongle Connected: Breathing Green light

Tips for setting up the device when the headset is connected

PC connection setup

Open “Control Panel” and click “All Control Panel Items.” Right-click on “Wireless Gaming Headset” and select “Set as DefaultDevice.”
Go to the “Recording” tab, then right-click on “Wireless Gaming Headset” and select “Set as Default Device.”

2. Mac connection settings

Click on “System Preferences.”
Navigate to “Sound.”
In the “Output” tab, right-click “Wireless Gaming Headset” and select “Set as default device.”
In the “Input” tab, right-click “Wireless Gaming Headset” and select “Set as default device.”

3. PS4/PS5 connection settings

Click “Settings” on the screen.
Go to the “Devices” tab.
Click the “Audio Devices” tab.
Set “Wireless Gaming Headset” as the default device for both “Input Device” and “Output Device” by right-clicking it.
Adjust “Volume Control (Headset)” as needed.

4. Nintendo Switch connection settings

Turn on your Nintendo Switch then plug the Nintendo Switch into the docking station and connect the monitor.
Connect the wireless adapter to a USB port on your Nintendo docking station.
Press the power button on the headset for 3 seconds to power on.

Warm Tips

Pressing the “mic button” and “RGB light button” buttons simultaneously for 6 seconds will clear all Bluetooth devices.
To maintain normal battery life, use the product at least once every two weeks and charge the headset in time after use.
If there’s no sound from the microphone or headset during use, it may be due to compatibility issues or improper use.Contact our after-sales service team for assistance.
For your safety, refrain from using the headset while cycling or driving, and avoid listening to music at high volumes for extended periods.Handle with care to prevent any damage to the appearance or functionality. Specifications are subject to change without prior notice.

Specifications

Model: FC-200
Charging: USB-C
Bluetooth version: V 5.4
Wireless/Bluetooth range: 10m/33ft
Drive diameter: Φ50 mm
Frequency response range: 20Hz~20kHZ
Working voltage: 3.7V
Battery capacity: 1200mAh
Battery charging voltage/current: 5V/1A
Battery time: charging about 2.5Hr, using about 50Hr (RGB Off and the 30% volume)
Support RGB changing lighting effect

Warranty Policy

FACHIXY products have a 12-month limited warranty from the original purchase date. If any issues arise, please contact our support team for assistance. We’re here to help you resolve any problems. For more information, visit the FACHIXY official website.

HTTP://FACHIXY.COM

Product Warranty

Dear customers:

Hello! To apply for after-sales service, please fill out the product warranty card according to your actual situation. Then send the completed warranty card back to the merchant where you purchased the product. Thank you!

Note: Please consult the merchant for the specific after-sales address