Car MP5 Player User Manual

Car MP5 Player User Manual

Car MP5 Player User Manual

SHENZHEN ZDZT ELECTRONIC TECHNOLOGY Car MP5 player User Manual

(2BHH7-7010)

Operation Manual

Reminder: All photoes here are for reference only, Specifications are subject to the phisycal product.

In order to prevent injuries and fires, pls pay attention to the following instructions:

In order to prevent short circuit and so on, do not drop the metal objects in the device.

If there is smoke or peculiar smell the device, pls turn off the power atonce.

Pls do not make the device falling or strong collision. In order to prevent device failure, pls observe the following note:

Pls do not install the device in the place of strong sunlight, high temperature, high humidity or dusty.

Pls replace the fuse which is the same specification. If you are using different specification of the fuse, may cause failure of the device.

In order to prevent short circuit, pls pull out the power wire when you replace the fuse.

In order to be able at any time to deal with road and traffic conditions change, pls lower the volume when driving.

Pls do not get the device wet when washing car, this may cause short circuit, then fire or other failure will be caused.

Warning

  1. Only connect the unit to a DC 12V power supply with negative grounding.
  2. Never install the unit where the operation for safety driving is restrained.
  3. Never use the video display function in the front when driving to prevent the violation of laws regulation and also to reduce the risk of traffic accident except using for rear view video camera.
  4. Never expose the unit, amplifier, speakers to moisture or water to prevent electronic sparks or fires.
  5. Pls don’t change the fuse in the power cord without professional guidance; improper fuse may cause damage to this using unit or even cause fire.

Installation

The unit installs for security, pls install it refer to the following diagram description:

  1. pls make the unit in proper place, connect the unit refer to the diagram, and test it works well or not.
  2. Pls wrapped the connection line with insulation tape to ensure complete wiring after testing well.
  3. Pls bend the hook of metal 1, and insert the metal to instrument panel then fixed it.
  4. Put the unit into metal hook until it lock.

General Features

  • 7″inch digital TFT Touch Screen
  • With TF card Slot, With USB 2.0 port.
  • 1080P Video Format
  • Support the Audio playback format of MP3/WMA/WAV/MKV/FLAC/OGG/APE.
  • Support the Video playback format of RM/RMVB/DVD(VOB)/VCD(DAT)/MP1/MP2/DIVX/XVID/MP4/H263/H264/FLV/3GP/SWF/AVI/ASF/MJPEG etc;
  • MOSFET amplifier: 60 watts X 4 max power output.
  • FM Range: 87.5MHz~108.00MHz(Europe)
  • With Remote Control
  • Power-off with auto-memory store function under radio or TF/USB mode
  • Clock Function
  • Mute Function
  • BT Function
  • Bass & Treble, L&R channel stabilizer
  • Aux In Function
  • Rearvien camera Function
  • Video input Function
  • MirrorLink

Basic operation

  1. when use reversing rear view function.reversing video signal from the corresponding port input connection back line, when reversing will automatically switch to reversing visual state.
  2. Audio/Vedio input(optional) Connect audio/Vedio lines,press Mode can select AUX-2 state.
  3. bluetooth function only for the unit with bluetooth

Use the BT functin,please Use the,phone pairing,equipment numbei:xxx,for password:0000

After connecting the mobile the bluetooth symbol turn green means the connection is ok,when calls come in will enter into the bluetooth interface automatically,press “ ” answering the phone, press “” hanging up the phone.

Wire Diagram

1 Rear Right ⊕ Speaker VIOLET 8 Rear Left Θ Speaker GREENBLACK 15 high beamline (Orange) ORNC 22 Video Input
2 Front Right ⊕ Speaker GRAY 9 Parking Sensor Controll wires(Pink) 16 Ground wire (Black) 23 ANT
3 Front Left ⊕ Speaker WHITE 10 Steering wheel key control line orange Black ORNC 17 Rearview 24 GPS ANT
4 Rear Left ⊕ Speaker GREEN 11 Power Antenna Ampifier Turn On (Blue) ORNC 18 Video Output 1 25 Recorder input
5 Rear Right Θ Speaker VIOLETBLACK 12 +12V Accessory/Switch(Red) 19 Audio output R
6 Front Right Θ Speaker  GRAYBLACK 13 brake line (brown) ORNC 20 Audio output L
7 Front Left Θ Speaker WHITEBLACK 14 +12V Power Supply (Yellow) 21 Video Output 2

Pls check the speaker line carefully before installation. If any grounding or touching, pls connection again or the unit will be burned.

Specification

SNR …………………………………………… 65dB

Frequency response ………………. 20Hz-20KHz

Loudspeaker Impendance …….. 4Ω 8Ω

The maximum output power … 4*60W

Tone control ………………………………. Bass +/- 7dB (100Hz)

Treble +/- 7dB (100Hz)

FM

FM frequency ………………………………. 87.5MHz∼108MHz

Sensivity ……………………………………….. 25dB

Selectivity ……………………………………… 60dB

Seperation …………………………………….. 35dB

Remote Control Description

  1. Power switch
  2. ← Right
  3. Mode switch
  4. Last song
  5. USB/TF
  6. Volume+
  7. Band/Automatic/Station search
  8. Digital key
  9. ↑ UP
  10. Menu
  11. Confirm/Play/Pause
  12. → Left
  13. ↓ Under the
  14. Next song
  15. Choice
  16. Volume-
  17. Answer the phone
  18. Hang up

Description of the steering wheel learning function

  1. After connecting the wires, pls open the Ul, choose the button which you need, eg:
  2. After connecting the wires, Press   button, it will show the Ul which you need. Press to enter into reset function
  3. Press button to prove setting sucessfully, then Exit interface

Front Panel

1 Last song
2 Press it long time tot urn on/off Press it.

Short time toe nter into Switch mdoe.

3 Next song
4 Knob

Button

Adjust VOL+/VOL-, Press it short

Time to enter into BASS/TRE/BAL/EQ/LOUD/VOL

/BRIGHT

5 TF TF
6 AUX AUX
7 RES RES
8 USB USB
9 MIC MIC
10 IR IR

MirrorLink Function instruction:

Please don’t playback video or mobile phone while driving

Connect the mobile-phone to the unit with an USB cable,Prompt interface as follows:

Multiple national languages

Car MP5 Player

Leave a Comment