Shenzhen DR-STE51B Elite Camera Drone User Manual 2AQ3A-STE51BR2424

S5C Elite Camera Drone User Manual

Model: DR-STE51B

(2AQ3A-STE51BR2424)

  1. For your safety, please follow the rules and safety guidelines whether you’re a beginner oran expert at flying drones.
  2. According to the relevant laws and regulations in US, all drones must be registered, except those that weigh 0.55 pounds or less (less than 250 grams) and are flown exclusively under the Exception for Recreational Flyers. Please login tothe website of https://faadronezone-access.faa.gov/#/ to complete the registration. The maximum take-off weight will be more than 249g ifthe drone is used with the Intelligent Flight Battery. Make sure to observe local laws and regulations about the take-off weight. If the buyer does not register timely, SNAPTAIN will not be responsible for any losses, penalties and injuries caused by illegal flights.
  3. To meet the electromagnetic requirements of aviation on the radio station, itis forbidden to fly drones within 6.21 miles(10km) on both sides of the runway centerline, or within 12.43 miles(20km) of both ends of the runway. It is also prohibited to fly a drone on the route ofan airline. Inthe area thatis prohibited by the relevant authority or department of your country, stop using all flying models and unmanned quadrotors.
  4. Please download the B4UFLY App from Google Play or App Store, which provides real-time information about airspace restrictions and other flying requirements based on your GPS location.
  5. Beginning September 16,2023, all drone pilots who are required to register their UAS must operate in accordance with the rule on Remote ID.

FLIGHT SAFETY

Please fly the drone indoors or in a windless open area. The maximum flight height is limited to 164 ft (50 m), and the maximum flight distance is limited to 328 ft (100 m). Before your first flight, please read the User Manual and Quick Guide carefully. For detailed operations, refer to the Flight Control section.

  1. For the safety of your property, keep the drone within your visual range during flight.
  2. The drone is made of materials including metal, fiber, plastic, and electronic components. Avoid prolonged exposure to direct sunlight and keep them away from any heat sources. Excessive heat can cause deformation and damage.
  3. The drone consists of various precision electronic and mechanical parts. Therefore, make sure that moisture and water do not enter the drone to prevent mechanical or electronic component failures that could lead to accidents.
  4. The performance of the drone and battery can be affected by environmental factors such as air density and temperature. Exercise caution when flying at altitudes above 3281 ft (1000 m) above sea level, as the performance of the battery and drone may be reduced.
  5. To avoid interference between the drone and other wireless devices, please turn off other wireless devices while using the drone.
  6. Avoid flying in areas where magnetic or radio interference may occur, such as near Wi-Fi hotspots, routers, Bluetooth devices, high-voltage power lines, high-voltage power transmission stations, mobile base stations, or broadcast towers. Flying in areas where interference can disrupt communication between the drone and remote may adversely affect flight direction and positioning accuracy, possibly resulting in loss of control. Interference can also cause errors in the video downlink connection.
  7. Be cautious around children. Avoid placing fingers in the rotating propellers.
  8. Inside the packaging are small accessories. Do not swallow them. Seek immediate medical help if accidentally ingested.
  9. Secure valuable items during indoor flights to prevent accidental damage due to operational errors.

BATTERY SAFETY

  1. RISK OF EXPLOSION BATTERY IS REPLACED BY AN INCORRECT TYPE
  2. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
  3. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY
  4. Under no circumstances should the battery touch any liquids. Avoid using the battery in rainy or wet conditions, as it may catch fire or explode unexpectedly.
  5. it is not allowed to use batteries that are not provided by the manufacturer. Additionally, it is advisable to use the package-included USB charging cable for charging the batteries.
  6. Batteries that are swollen, leaking, or damaged are strictly forbidden.
  7. it is recommended to use the battery between -10°C and 40°C; overheating may lead to a fire or explosion. A battery’s performance can be adversely affected by extremely low temperatures.
  8. Do not insert or puncture the battery with any sharp object.
  9. Battery liquid is highly corrosive, so stay away if it leaks. If skin or eyes are contacted, rinse immediately with plenty of water and seek medical attention.
  10. Please keep the battery out of children’s reach. Immediately seek medical attention if a child swallows parts.
  11. After being dropped or impacted, the battery should not be used again.
  12. Place the battery away from heat sources, such as a car in direct sunlight or on a hot day, a fire or a stove.
  13. To prevent a battery from entering an over-discharged state, avoid storing it for extended periods of time once it has been fully discharged. If a battery is over-discharged, the battery cell will be damaged and unable to be recharged.

WHAT’S INCLUDED

PRODUCT OVERVIEW

Drone

  1. Arm LED Indicators
  2. Top LED Indicator
  3. Rear Arm
  4. Power Button
  5. Camera
  6. Front LED Indicators
  7. FrontArm
  8. Propeller

  1. Optical Flow Sensor
  2. Memory Card Slot
  3. Battery
  4. Rear LED Indicator

*Replace the Propeller (Optional)

The marks on the propellers (A/B) should match the marks on the drone arms when you replace the propellers.

Remote

  1. Phone Holder
  2. Emergency Stop
  3. Left Control Stick
  4. One Key Take-off and Landing
  5. Handle
  6. Power Button
  7. Status Indicators
  8. Speed Switch
  9. Circle Fly
  10. Right Control Stick
  11. 3D Flip

  1. Take Photo
  2. Record Video
  3. Camera Up
  4. Camera Down

FIRST-TIME USE

Flight Preparation

1. The propellers and arms of the drone are folded for packaging purposes. Please unfold the front arms, then the rear arms.

2. Charge the battery with the USB charging cable provided in the box. The cable can connect to a plug with a maximum output of 5V 3A.

 

Notes

  • It’s not recommended to charge the battery using the USB port of a PC.
  • Please note that when flying in low-temperature environments, the flight time of the drone may be reduced.

3. Install the battery into the drone after it’s fully charged.

4. Insert a memory card into the drone. (Memory cards must be purchased separately. However, you can still use the drone’s camera even if a memory card is not inserted, although the resulting videos and pictures may not be in high-definition quality.)

5. Insert 3 AAA batteries into the remote and tighten the screw.

6. Unfold the phone holder and handles. Then mount your mobile phone to the phone holder.

7. Please remove the protective film on the lens before flying.

8. Place the drone on a flat and level surface, then press and hold the power button on the drone for 3s to power it on.

9. Press and hold the power button on the remote for 3s to power it on. The drone will automatically pair with the remote. If the pairing fails, please power off the remote and drone and then try again.

* Pairing: All arm LED indicators on the drone keep flashing quickly.

* Successfully Paired: All LED indicators on the drone turn solid on.

Connect the SNAPTAIN FPV App with Your Drone

Step 1:

Download and install SNAPTAIN FPV from Google Play™/App Store™ or scan the QR codes below.

Step 2:

Simply navigate to the WiFi setting of your mobile phone and search for SNAPTAIN-S5C Elite-XXXXXX WiFi to connect.

Step 3:

Launch the SNAPTAIN FPV app, then tap FUNCTION DISPLAY to enter the main page to see the live preview.

FUNCTION OVERVIEW

Flight Control

Take-off

Option 1:

Unlock the drone by simultaneously pushing the Left Control Stick to the lower right at 45° and the Right Control Stick to the lower left at 45° (or Left Control Stick to the lower left and Right Control Stick to the lower right) until the propellers start rotating. Then, push the Left Control Stick forward.

Option 2:

Press and hold the One Key Take-off button for 1s.

Tip: Before taking off, ensure the drone is on a level surface and the surrounding area is obstacle-free.

Flight Directions

The default remote mode is Mode 1 (used for manual illustration). To switch the remote mode: with the remote turned off, press and hold the Take Photo button; while holding the Take Photo button, press and hold the Power button for 3s until the remote is turned on.

Mode 1

Mode 2

Functions

One Key Take-off and Landing

* Take-off: Place the drone on a flat and level surface without any obstacles then press and hold the ® button for 1s to make it ascend and hover at a height of 3.9ft (1.2m).

* Land: When the drone hovers in the air without any obstacles, press and hold the ® button for 1s to make it descend and land until the propellers stop rotating.

Circle Fly

If there are no obstacles within a radius of 5 meters (recommended) around the drone, press the ® button on the remote to make the drone fly in a circular pattern.

Press the button again to disable this function. To perform this function, the drone must have enough power.

Trajectory Flight

  1. Open the app and navigate to the main page.
  2. Tap on the button (Trajectory Flight) icon and adjust the scale by sliding the scale bar. The default scale is set to 1:1.
  3. Use your finger to draw a desired flight path on the blank area of the screen.
  4. The drone will follow the trajectory path without changing its flight height, but the length of the trajectory will vary based on the selected scale.

3D Flip

After flying the drone in an obstacle-free area, press the &) button to activate the 360° flip function, and then use the Right Control Stick to perform flips. Push the stick forward, backward, leftward, or rightward to execute a 360° flip in the corresponding direction. If no flip operation is executed within 10s after activating the function, the drone will automatically exit standby mode.

To perform this function, the drone must have enough power.

Emergency Stop

If an abnormal situation occurs, you can press and hold the ) button on the remote for 3s to make an emergency stop. When this function is activated, the drone’s motor and propellers will stop rotating, causing it to fall from the sky and potentially pose risks of damage. Use this function with caution.

Please make an emergency stop when the drone’s flight height is below 9.8ft (3m). If the drone’s flight height is above 9.8ft (3m), carefully descend it to a height below 9.8ft (3m) before performing the emergency stop. After an emergency stop, if you intend to fly the drone again, please restart both the drone and the remote control.

Find Your Drone

When the drone is accidentally lost during flight, simultaneously press and hold the buttons on the remote for 3s to try to locate it.

In response, the drone will emit rapid beeps and the LED indicators will keep flashing rapidly. To exit this state, you can either repeat the above operation or briefly press the © button on the drone.

To perform this function, the drone must be connected to the remote and have enough power.

Camera

Take Photos: Press the button on the remote or tap El on the app to take a photo. The photo will be saved both on your mobile phone and the memory card.

Record Videos: Press the button GW on the remote or tap @M on the app to start recording a video. Press the same button or tap the same icon on the app again to stop recording. The video will be saved both on your mobile phone and the memory card. (Please note that the drone cannot capture photos while itis recording a video.)

To adjust the camera tilt angle, press the Camera Up and Camera Down buttons on the remote. The adjustment range is from 0° to 90°.

Speed Switch

Slide the switch toggle to the left for a slower speed or to the right for a faster speed.

EXPLANATION OF DRONE’ S LED INDICATORS

Status Front LED Indicatory (White) Rear & Top Led Indicators (Blue) Arm LED Indicators (Front blue; Rear:red)
Powering On Light Up Light Up Light Up
Pairing Solid on Solid on Flash Quickly
Ready to fly / During Flight Solid on Solid on Solid on
Reset Flash Quickly Solid on Off (light up after successful reset)
Fail to execute commands Flash Once Solid on Flash once
Emergency Stop Flash quickly and continuously Solid on Flash quickly and continuously
Low Battery Solid on Flash Quickly and contunuously Solid on
Powered Off Off Off Off
Find your Drone Flash three times in a loop Flash three times in a loop Flash three times in a loop

BEEPS EXPLANATIYON

Status Beep(s)
Powering on the drone On/off Sound
Powering on the remote 1 short beep
Powering off the drone On/off sound
Powering off the remote 2 short beeps
Command executed successfully 1 short beep
Error 2 short beeps
Emergency Stop 6 short beeps
Low Battery 2 short beeps every 2s
Find Your Drone Repeated on/off sounds

SPECIFITAON

Model DR-STE51B
Weight(with battery installed) about 145g
Max. Flight Time 15 minutes
Operating Temperature 32°F-104°F
Dimensions 7.21*6.25*2.13 inches
Horizontal Flight Speed (no wind) Slow: 9.84 ft/s (3m/s)
Fast: 16.4 ft/s (5m/s)
Max. Relative Flight Height 164 ft (50m)
Max. Flight Distance 328 ft (100m)
Battery Capacity 3.7V 1200mAh Lithium Battery
Charging Time about 160 minutes (depending on the power of the charger)
Input Voltage 5V

Camera

FOV about 70°
Photo Resolution 1920×1080 Pixels
Video Resolution 1920×1080 Pixels @25fps
Operating Frequency 2412-2462MHz
Protocol Supported

Remote

Operating Frequency 2440MHz to 2475MHz
Max. Operating Distance 328ft (100m)
Battery Capacity 1.5V AAA Battery x3 (not included)
Applicable Up to 3.15 inches
Operating Temperature 32°F-104°F

 

Leave a Comment