BMK2404

Wireless Keyboard

Keyboard Overview

High end and dazzling backlit mechanical keyboard.

RGB lighting with multiple cool lighting modes.

Adapted systems: Windows XP, Win7, Win8, Win10

Product Specification

Port: USB 2.0

Number of Keys: 87

Switch: Mechanical switch

Lifespan: 50 million

Total Travel: 3.75+0.25mm

Operating Force: 50+10g

Type-C Line: 150cm

Dimension: 358x130x41mm

Mode switching

Bluetooth mode:

Set the two gear switch to “ON”

(1) Long press FN+Q to switch to BT1 Bluetooth channel

1. The Q key flashes rapidly at 2.5Hz and stops flashing

after successful code matching.

(2) Long press FN+W to switch to BT2 Bluetooth channel

2. The W key flashes rapidly at 2.5Hz and stops

flashing after successful code matching.

(3) Long press FN+E to switch to BT3 Bluetooth channel

3. The E key flashes rapidly at 2.5Hz and stops flashing

after successful code matching.

(4) Short press FN+Q, W, E to switch the Bluetooth channel,

connect the corresponding Bluetooth channel back, and

the corresponding indicator light will flash slowly at 0.5Hz.

After successful connection, it will stop flashing.

 

 

2.4G mode: Set the two speed switch to “ON”

 

Wired mode:

(1) Connect the keyboard to the computer using a data

cable and wait for the automatic installation of the driver

before using the keyboard.

(2) Two speed switch requires short pressing FN+TAB to

switch to wired mode

 

Power saving instructions:

(1) Power saving design: In wireless mode, if there are no

buttons pressed for 2 minutes, the keyboard backlight

will automatically turn off, and the keyboard will enter

standby mode; 30 minutes of inactivity, the keyboard

enters deep sleep, while disconnecting 2.4G or Bluetooth

and turning off all LEDs. Press any key to exit sleep.

(2) USB wired mode never sleeps.

 

 

Indicator lights

(1) The Caps Lock light is located at this button,

and when turned on, the button will light up in white.

The actual effect will prevail

(2) The wireless coding light is located at the Q/W/E/R

button, and the button flashes white light quickly during

coding. The actual effect shall prevail.

 

Light Adjustment

 

 

1. This machine supports multiple lighting effects.

1. Fn+INS key, can switch the lighting effect in the main key
2. area, and comes with multiple lighting effects at the factory.

1. Fn+DEL key, can switch the main key area light color(RGB version).

1. Fn+|/1 keys can be used to adjust the brightness of the main key area lights.

1. Fn+</— keys can be used to adjust the light effect speed in the main key area.

1. Fn+APP key, can switch the lighting effects on both sides

1. Game lighting (different models have different quantities, subject to the actual product)

1. FN+Right Shift+1=Custom Light 1

1. FN+Right Shift+2=Custom Light 2

 

 

Other Fn combination keys

 

 

(some models do not have some combination keys)

FN+ESC=Press and hold for 3 seconds to restore factory

settings

FN+F1=My Computer

FN+F2=Home Page

FN+F3=Email

FN+F4=Calculator

FN+F5=Player

FN+F6=Stop

FN+F7=Previous track

FN+F8=playback pause

FN+F9=Next track

FN+F10=Mute

FN+F11=Volume decrease

FN+F12=Volume increase

 

 

FCC Caution:

 

 

This device complies with part 15 of the FCC Rules.

 

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority

to operate the equipment.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception,which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for

help.The device has been evaluated to meet general RF

exposure requirement. The device can be used in portable

exposure condition without restriction.

 

 

Customer Service

 

 

Worry-Free Product Warranty:

18-month

 

Technology-Support Email:

[email protected]

 

If you have any questions, please contact us.

We will provide you with 7*24h customer service.

 

Company Name:

HAINAN JIAMEIHUACHENG INFORMATION TECHNOLOGY CO., LTD

Made in China