Portable Radio

Hand Handle FM TELESCOPIC ANTENNA

Inclusions

1. Portable Radio
2. Micro USB Charging Cable
3. AUX Cable

Power On/Off

1. Toggle the power switch to turn the device on or off. By default, it powers on in Bluetooth® mode, accompanied by a voice prompt and a flashing white light.

FM Mode

1. Press the “Mode” button to switch to FM mode and listen for the voice prompt.
2. Rotate the FM/AM tuning control to locate FM radio stations.
3. Use the “Play/Pause” button to mute or unmute.
4. Adjust the volume with the “Volume” control; a beep is heard at maximum volume.
5. Note: Fully extend and adjust the FM telescopic antenna for optimal reception.

AM Mode

1. Press the “Mode” button to switch to AM mode and listen for the voice prompt.
2. Rotate the FM/AM tuning control for desired AM stations.
3. Mute or unmute using the “Play/Pause” button.
4. Adjust the volume with the “Volume” control; a beep is heard at maximum volume.
5. Note: Alter the unit’s position if AM reception is weak to improve signal quality.

Bluetooth® Mode

1. Switch to Bluetooth® mode using the “Mode” button until the voice prompt is heard.
2. Pair your device through Bluetooth® settings to “Hearth & Hand 09”.
3. White light flashes during pairing and becomes solid once connected.
4. Use “Play/Pause” to control playback and “PREV”/”NEXT” for track selection.
5. Volume adjustment is available with the “Volume” control, with a beep at maximum.
6. Unpair by pressing “Mode” for 2 seconds and re-pair as needed.
7. If inactive for 30 seconds, the device enters hidden mode; press “Mode” again to reconnect.
8. The device powers off automatically after 10 minutes of inactivity.
9. The Bluetooth® automatically reconnects to the last paired device within range.
10. Note: Ensure Bluetooth® devices are within 33 feet for optimal performance.

AUX Mode

1. Switch to AUX mode with the “Mode” button, and insert the AUX cable.
2. Use “Play/Pause” for muting/unmuting.
3. Control volume with the “Volume” knob; a beep signals maximum volume.

Charging

1. Connect the micro USB end to the charging port and USB end to a 5V 1A power adaptor.
2. A full charge takes around 3 hours, indicated by a red light, which turns off when complete.
3. It is recommended to fully charge the device before first use.

Troubleshooting and Tips

1. If not working, toggle the power switch and try again.
2. Ensure the battery is charged if the device won’t turn on.
3. If charging issues occur, verify the power supply is functioning and meets the specifications.
4. Adjust the volume if there’s no sound.
5. For Bluetooth® issues, unpair any existing device and re-pair the intended one.
6. Optimize reception by retuning stations or adjusting the FM antenna for clearer sound.

Specifications

1. Power Input: 5V=1A
2. Built-In Li-ion Battery: 3.7V DC, 1200 mAh
3. Bluetooth® Pairing Name: Hearth & Hand 09

Need Some Help?

If you have trouble pairing or questions about the device, please reach out for support.

PDF

2baxw_tfb152_usersmanual_7871731_f654e5b878