TP-LINK WiFi Router User Manual

TP-LINK WiFi Router User Manual

FCC: 2BCGWWR3002X

Appearance

LED Indication

Button Description

Interface Description

TP-LINK WiFi Router User Manual

Set Up Your Router

Method ONE: Via the Tether App

1. Download the Tether app via Apple Store or Google Play, or simply scan the QR code.

2. Open the Tether app and log in with your TP-Link ID.

Note: If you don’t have an account, create one first.

3. Tap the + button in the Tether app and select Portable Router.

Note: Due to Tether app updates, your actual user interface and pathway may differ from those depicted here.

*Router network mode compatibility in the Tether app may vary between app versions.

4. Choose how you would like to connect your router to the internet. Then follow the steps to complete the setup.

• Connect via Ethernet: The router gets internet via an Ethernet cable connected to the existing wired network.
• Connect via Wi-Fi: The router gets internet via an existing public Wi-Fi and turns it into a private network.
• Connect via Mobile USB: The router gets internet via a USB cable connected to a mobile device (with a SIM card inserted).
• Connect via USB Modem: The router gets internet from a USB modem (with a SIM card inserted).

Note: If you want to use it in Access Point/Extender Mode, go to More > Operation Modes to switch the mode as needed. For Client Mode, follow Method TWO to switch the mode on the web page.

Enjoy the internet!

To enjoy a more complete service from TP-Link, bind your TP-Link ID to the router.

Method TWO: Via a Web Browser

1. Power on the router.
2. Wait until the router’s LED turns solid (blue or red) before moving on.
3. Connect your device to the router (wireless or wired).

• Wireless: Connect your device to the router’s Wi-Fi. The default wireless network names (SSIDs) and wireless password are printed on both the Wi-Fi info card and the label at the bottom of the router.
• Wired: Turn off the Wi-Fi on your device and connect to the LAN port of the router with an Ethernet cable.

4. launch a web browser and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in.

Note: If the login window does not appear, please refer to Q1 of Need Help? in this guide.

5. Choose how you would like to connect your router to the internet. Then follow the steps to complete the setup.

• Connect via Ethernet: The router gets internet via an Ethernet cable connected to the existing wired network.
• Connect via Wi-Fi: The router gets internet via an existing public Wi-Fi and turns it into a private network.
• Connect via Mobile USB: The router gets internet via a USB cable connected to a mobile device (with a SIM card inserted).
• Connect via USB Modem: The router gets internet from a USB modem (with a SIM card inserted).

Note: If you want to use it in Access Point/Extender/Client Mode, exit the quick setup, and click Change Mode on top of the page, then select the mode as needed.

Enjoy the internet!

To enjoy a more complete service from TP-Link, bind your TP-Link ID to the router.

Network Modes

Wi-Fi Information

The default wireless network names (SSIDs) and wireless password are printed on the label at the bottom of the router.

A Wi-Fiinfo card is included in the package.

When you set new SSIDs, Wi-Fi passwords, login account info, and more, please write them down on the card for convenient management.

Secure Surfing with VPN Encryption

The router supports VPN Server and VPN Client.

By setting up a VPN Client, the device connected to the router can directly access the VPN server for remote office and cross-regional access. At the same time, your personal information is encrypted and protected.

With VPN Server, external devices can access the VPN server, including remote desktops, NAS, printers, cameras, and other devices in the home network.

• Setup via Tether: Go to More > Advanced Setttings > VPN Server/VPN Client.
• Setup via Web: Log in to the web management page of the router and go to Advanced > VPN Server/VPN Client.

Frequently Asked Questions (FAQ)

Q1. What should I do if I can’t access the web management page?

• Reboot your router and try again.
• If the computer is set to a static IP, change its settings to obtain an IP address automatically.
• Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1, http://192.168.1.1 or 192.168.0.254 (for RE/Client modes) in the web browser.
• Use another web browser and try again.
• Disable and enable the network adapter in use.

Q2. What should I do if I forget the router’s web management password?

• If you are using a TP-Link ID to log in, click Forgot Password? on the login page and then follow the instructions to reset it.
• Alternatively, refer to FAQ > Q3 to reset the router. Then visit http://tplinkwifi.net to create a new login password.

Q3. How do I restore the router to its factory default settings?

• With the router powered on, press and hold the Reset button for 6 seconds until the LED blinks red to restore the factory default settings.

Q4. What should I do if there is no internet access? 

• Check if the internet is working normally by connecting a computer/phone directly to the current network. If it is not, contact your internet service provider. If you’re in a hotel room or on a trade show, the internet may be limited and requires that you authenticate for the service or purchase the internet access.
• If you are using a cable modem, power off your modem for about 5 minutes, then power it on and check the internet. If your modem has more than one Ethernet port, keep other ports unconnected.
• Log in to the web management page, and go to the Network Map page to check whether the internet IP address is valid or not. If it’s valid, go to Advanced > Network > Internet, click Advanced Settings, select Use the Following DNS Addresses, set the primary DNS to 8.8.8.8, and set the secondary DNS to 8.8.4.4. If itis not, check the hardware connection or contact your internet service provider.

Q5. What should I do if I forget my Wi-Fi password?

• If you have not changed the default wireless password, it can be found on the label of the router.
• Connect a computer directly to the LAN port of the router using an Ethernet cable. Log in to the router’s web management page at http://tplinkwifi.net, and go to the Wireless page to retrieve or reset your wireless password.

Q6. What should I do if my wireless signal is unstable or too weak?

It may be caused by too much interference.

• Set your wireless channel to a different one.
• Choose a location with fewer obstacles that may block the signal between the portable router and the main AP. An open corridor or a spacious location is ideal.
• Move the router to a new location away from Bluetooth devices and other household electronics, such as cordless phones, microwaves, and baby monitors, to minimize signal interference.
• In Range Extender mode, the ideal location to place the router is halfway between your main AP and the Wi-Fi dead zone. If that is not possible, place the router closer to your main AP to ensure stable performance.

Q7. What should I do if I cannot enter the captive portal when the router is set to Hotspot mode?

• If the portal login page didn’t open during the Quick Setup process, connect your smartphone or computer to the router, then open any website, and you will be redirected to the portal login page.
• If some public hotspots limit the number of devices each customer can access by MAC address, do the following:

1. Connect a smartphone to the public hotspot’s Wi-Fi. Find the smartphone’s MAC address on its Wi-Fi list, and write the MAC address down.
2. Login to the web management page of the router and go to Advanced > Network > Internet > Router MAC Address. Select Use Custom MAC Address, enter the MAC address that your smartphone uses to connect to the public hotspot’s Wi-Fi, and click SAVE.

Q8. What should I do if I want to change the router’s network mode?

1. Log in to the web management page of the router and go to Advanced > System > Operation Mode or click Change Mode on top of the page.
2. Select your desired network mode, and click SAVE. Then follow the instructions to complete the settings.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at

https://www.tp-link.com/support/ukca

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

TP-LINK WiFi Router User Manual

PDF