Table of Contents
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
SMARTO 4L/6L
Pet Smart Video Feeder
Operation Manual
DESIGNED BY ZHONGHENG
Please carefully read this Manual before use and keep it properly.
Product Introduction
Main Components
Product Introduction
Included Items
Notes
- We will regularly carry out product improvements to provide better products.
- If the product illustration is slightly different from the physical product, the physical product shall prevail.
- In this manual, a 4L bucket-shaped product is used as an example.
Instructions for Safe Use
«This product is suitable for dried pet foods or freeze-dried foods with a diameter of less than 25 mm and must not contain any wet foods. Do not add any foreign objects other than pet food into the food bucket.
+ The product should never be immersed, soaked, rinsed, or exposed to moisture, high temperatures, or direct sunlight.
* It is recommended to clean the food delivery assembly every other month to prevent debris accumulation.
+ The product is intended for use with cats or medium- and small-sized dogs.
+ Please use the product indoors and keep it away from fire.
+ It is advisable to place the feeder in a corner or near a wall to prevent it from being toppled over by a pet.
+ Please use the original adapter and power cord. When (un)plugging the adapter, do not pull the power cord directly.
» The device only supports TF (MicroSD) cards in FAT32 format. Any MicroSD card in other formats, if inserted, will be automatically formatted by the device. Therefore, please back up your data from the MicroSD card beforehand.
* This product uses three No.5 (AA) batteries (alkaline ones recommended). If the feeder is not going to be used for a long period, please remove the batteries to avoid electrolyte leakage.
+ Do not attempt to disassemble or repair the device yourself. For any faults or damage, please contact after-sales support promptly.
+ This product is suitable for use by individuals above 12 years old. Children can only use it under the guidance of adults.
«If you need to go out, please check the batteries inside the battery compartment and ensure there is sufficient battery power (this product only supports alkaline batteries).
Installation Instructions
Although the product is equipped with an anti-slip mat and a suction disc at its base to prevent it from being knocked over by pets, it is still recommended to place the feeder in a corner or near a wall.
1. Power-On
Insert the power cord into the power port at the bottom of the device. Wait for the circular light on the device to turn blue, indicating that the device is powered on successfully.
2. Battery Installation (The Product Can Work Without Batteries)
Users may choose to install batteries based on their individual needs. The product requires three No.5 (AA) batteries, which should be installed at the bottom of the product. Please note that the product only supports alkaline batteries.
Notes:
- Power the feeder using the mains for daily use and use the batteries only as a backup power supply.
- If the external mains power to the feeder is unexpectedly interrupted, the device will automatically switch to battery power.
- To ensure the basic feeding function operates normally as a priority, the feeder will enter power saving mode.
- To ensure normal food dispensing, other functions, such as light effects, food shortage reminders, and UV sterilization, will be turned off.
Statuses of Indicator Light
Operation Instructions
1. App Download
For optimal use of the Smart Pet Feeder with Camera, please scan the QR code below to download and install the Smart Life app. After installation, sign up and log in to your account.
2. Network Configuration for Product
Insert the provided insertion pin into the small hole beside the power port at the bottom of the product. Press and hold the RESET button for 5 seconds until you hear the voice prompt, “Entering network configuration mode.” Wait for the system to load, and when you hear another voice prompt, “Waiting to receive wireless configuration information,” the circular light on the side of the device will flash blue, indicating that the device is ready for network configuration.
Interface Navigation
- Open the Smart Life app and tap “Add Device” in the center, or tap the icon at the upper right corner to select a device to add. Choose the “Small Household Appliances” category from the list shown below, and then select “IPC Pet Feeder (Wi-Fi)” from this category. Finally, follow the operation steps to bind the device.
Notes
- The Smart Feeder with Camera only supports network configuration under the 2.4G Wi-Fi band. Please ensure that the router is operating on the 2.4G band during connection; otherwise, the network connection and configuration will fail.
- Changing the Wi-Fi account or password may cause connectivity issues with the connected device. In this case, unbind the device from the mobile app and re-configure the network.
Interface Navigation
* Recommended to wipe the camera every
two weeks for a better viewing experience.
Interface Navigation
Manual Feeding
By default, press and hold the manual feeding button for 3 seconds to dispense one portion of food (about 15~20 g perportion). You can set the number of portions for manual feeding in the APP.
Removal of Top Cover
Turn the top cover by 90° from the locking position to the unlocking position, and then lift it upwards
Removal and Installation of Food Tray
1. Removal of Food Tray
Lift one side of the feeder food tray, hold the feeder, and pull out the food tray downwards. The removed food tray can be cleaned, and it is recommended to do so every few days, which can effectively protect your pets from chin acne
2. Installation of Food Tray
Align the buckle at the feeder bottom (just below the camera) with the food tray buckle; then, directly insert the food tray and lock it in place
Desiccant Placement
Open the desiccant box built inside the top cover, spread the desiccant flat in the box, and then put the lid on.
It’s recommended to replace the desiccant every month
Insertion of Memory Card
This product supports 16-512GB, Class10 and later memory cards (TF=MicroSD cards)
Find the TF card slot at the feeder’s bottom, lift the soft rubber cover from the slot, and insert the TF card with its metal surface downwards and toward the battery compartment
Notes
Before removal, accessories A and B are integrated. Therefore, when you push out accessory A, accessory B will also be pushed out along with it. In some cases, accessory C might also be pushed out together.
Removal and Installation of Food Bucket
Removed Accessories
Washing Accessories Regularly
Removal and Installation of Food Bucket
2. Installation of Food Bucket
Notes:
Accessories should be washed regularly and can be rinsed directly with clean water. The food bucket can also be washed in a dishwasher and must be inverted vertically during washing.