Table of Contents
Sperax Walking Pad User Manual
Sperax Walking Pad User Manual
FCC: 2BH4T-RM-01
Model: RM-01
Please read this User Manual carefully before using the product.
Welcome
Thank you for choosing the Walking Pad. This innovative health and fitness device perfectly combines walking exercise with vibration massage functions, allowing you to enjoy professional-level walking workouts at home. Additionally, you can experience a comfortable vibration massage after exercise, effectively alleviating muscle fatigue.
Specifications
Product & Accessories
LED Display
Remote Controller
How to Use
Walking Mode
Start
- Plug in & turn on the switch.
- Press [on/off] on the controller to start.
Speed up
Press [ + ] on the controller, each press increases 0.Jkm/h.
Slow down
Press [ – ] on the controller, each press decreases 0.km/h.
Stop
Press [on/off] on the controller to stop gradually.
Vibration Massage Mode
Turn on the vibration massage: After the walking exercise is finished or in standby mode, use the remote control to press the [=] button.
Level changing: There are four levels in the vibration massage mode. Each time the [2] button is pressed, the level will switch in sequence.
Operating Time: Each time the vibration massage mode is activated, the total operating time is 5 minutes. During this period, the level can be switched at will, but the total operating time will not change,
Massage Area: Please stand on the designated vibration massage area marked on the walking pad to ensure the best massage experience.
Cooling Time: After the vibration massage mode has been running for 5 minutes, the machine will automatically stop. It is necessary to rest for 30 minutes before the vibration massage mode can be activated again.
Safety Guidelines
Safety Placement and Environmental Requirements
Flat Surface: Place the device on a flat, stable surface to prevent tipping or movement during use.
Clear Space: Ensure there is at least 50cm around the device for safe access and operation, awiding any obstructions that could lead to accidents.
Suitable Environment Ensure the environment is well-ventilated and away from areas that are damp, excessively hot, dusty, or contain flammable materials.
Personal Preparation and Precautions
Wear Appropriate Attire: Wearing non-slip shoes and comfortable clothing can help prevent falls and ensure comfort during exercise.
Consult a Doctor: Before starting any exercise regimen, it’s import- ant to consult with a healthcare professional to ensure that the activity issuitable for your health condition.
Gradual Progression: Start at a low speed and gradually increase the speed/duration to avoid overexertion.
Maintain Balance: Espedially for treadmills without handrails, always pay attention to maintaining body balance. Use core strength to stabilize the body and avoid sudden changes in speed or direction that could lead to falls.
Operational Standards
Proper Use: Understand and follow the correct usage of the device to awoid injuries. This includes setting appropriate speed.
Proper Start and Stop: Follow the instructions to start and stop the walking pad correctly, avoiding sudden acceleration or deceleration,
When stopping, gradually slow down to a halt to prevent sudden stops that may cause instability.
Health Monitoring and Response
Monitor Health: Keep track of any changes in health status or symptoms that may indicate the need to adjust or stop the exercise.
Rest: Ensure adequate rest and recovery time, especially for those with health conditions that may affect their ability to recover from physical activity.
Cleaning and Maintenance
Regular Cleaning: Wipe the surface and walking belt with a soft damp cloth or a special cleaning agent, avoiding the use of corrosive cleaning agents or direct water washing of the equipment.
When cleaning, please make sure the power is disconnected to prevent electric shock.
Inspection and Maintenance: Regularly check whether the screws, belts, motor, and other parts of the device are loose or worn out, and repair or replace them promptly if any abnormalities are found.
Keep the surrounding environment of the device clean to avoid affecting safety.
Special Population Precautions
Pregnant Women, Postoperative Patients, and Individuals with
Special Medical Conditions: Please consult with a doctor or professional before using the device to ensure the safety of your exercise.
Children and Pets: Ensure that children use the device under adult supervision, and keep pets away toprevent accidents.
By following these safety guidelines, you will be able to enjoy the device better.
Maintenance and Care
Cleaning the Walking Pad
Turn Off and Unplug:Ensure the walking pad is turned off and unplugged before cleaning.
Dampen a Cloth:Use a 100% cotton cloth dampened with a small amount of mild cleaning agent. Avoid using harsh chemicals, acids, or corrosive cleaners that could damage the treadmill’s surface.
Wipe Dust and Stains:Clean the dust and stains from the main frame and the surface of the belt. Do not wipe under the belt.
Clean the Ground:After some use, dust and stains may accumu= late on the ground at the tail end, which is normal. Simply wipe it clean.
Walking Belt Lubrication
Turn off and remove the power cord.-Lift the edge of the walking belt and apply the lubricant to the inner surface=Reconnect the power supply.
Allow the walking belt to run at a speed of 4 km/h for 10-20 seconds before it is ready for use,
For lubrication, you will need to use 5-10mm of the lubricant.
Applying too much can cause slipping, which may affect normal use.
Apply the lubricant once every 3 months.
Fixing the slipping belt
- Set the walking pad to a speed of 4 km/h
- Adjust the belt based on its deviation direction: If the belt deviates to the left, tighten the screw on the left side clockwise or loosen the screw on the right side counterclockwise; if the belt deviates to the right, use the same method to adjust the corresponding screws.
- After each adjustment, wait for at least 30 seconds to ensure the belt moves slowly to the correct position before deciding whether further adjustments are needed.
Troubleshooting
ERRO2 Surge Protection
Replacing the controller & check the motor wiring connections
ERRO5 Overcurrent Protection
The walking belt has excessive friction resistance and requires lubrication; or the controller may be damaged
ERRO6 Overload Protection
The walking belt has excessive friction resistance and requires lubrication; or the controller may be damaged
Warranty Card
Sperax Walking Pad User Manual