Table of Contents
Zigbee Smart Water Valve User Manual V1.0
(2APN5SWV)
Introduction
A Zigbee Smart Water Valve powered by four AA batteries, which easy and quick to install. You can remotely control and set scheduled irrigation, quantitative irrigation, intelligent scenes and so on through the APP to make the traditional irrigation system intelligent. It supports statistics of irrigation water consumption, and can view 6-month historical records at any time, helping you
better manage water resources and save water bills.
*The functional characteristics depend on the functionality of Zigbee gateway.
- Inlet
- Outlet
- Button
- Single press: Turn on/off the smart device.
- Press and hold for 5 seconds: The device enters the pairing mode.
4. LED indicator (Green)
- Steady on: Normal connection with the gateway.
- Slow flash: The device is in pairing mode.
- Fast flash: Abnormal connection with the gateway.
5. Battery slot
Compatible Voice Assistants
Specification
| Model | SWV-NH, SWV-BSP |
| MCU | EFR32MG22 |
| Rating | 6V=(4*1.5V AA) |
| Wireless connection | Zigbee 3.0 |
| Communication distance | ~~ 130M (open space) |
| Waterproof | IP55 |
| Working Pressure | 0.06~0.8 MPa |
| Net weight | 278g |
| Dimension | 152x100x46mm |
| Color | Black |
| Casing materials | PC+ABS |
| Working Temperature | 5~60C |
| Watering Temperature | 5~40C |
| Working humidity | 5%~95% RH, non-condensing |
| Working altitude | <2000M |
| Certification | CE/FCC/ISED |
| Executive standard | EN62368-1 |
Download the eWeLink App & Add SONOFF Zigbee Gateway
Please download the “eWeLink” App from Google Play Store or Apple App Store.
Power On the Device
1.Hold both ends of the battery compartment cover and pull out the battery slot.
2. Install four AA batteries.
3. Firmly press the battery slot into the device until the snap at the arrow is visible.
4. After powering on, the button LED light flashes.
Scan QR Code to Add Device
Enter “Scan”
Scan the QR code on the device
Select “Add Device”
Long press the button for 5 seconds
The LED indicator flashes slowly for 180s
Select Zigbee gateway
Wait until the addition is done
Matched Gateways
Recommended SONOFF gateway models: ZBBridge—-P (v2.0.0), NSPanel Pro (V3.3.0), iHost (V2.1.0), ZBBridge-U (soon to be supported)
*Before adding a device, please upgrade the gateway firmware to the aforementioned version or the latest version available.
Other compatible SONOFF gateway models: ZBDongle-P, ZBDongle-E
Third-party compatible gateway models:
Amazon Gateway Models: Echo Plus 2nd Gen, Echo Show 2nd Gen, Echo 4th Gen
*Other gateways supporting the ZigBee 3.0 wireless protocol. Detailed information will be provided in accordance with the final product specifications.
Installation
First, wrap the thread seal tape around the threads of the faucet. Then, screw the nut of the water inlet of the equipment onto the faucet. After ensuring that there are no leaks, connect the hose to the water outlet of the equipment. If the water outlet leaks, please wrap the thread seal tape around the threads of the water outlet.
*It is recommended to install vertically as horizontal installation may increase the error in flow rate measurement.
Communication Distance
The maximum communication distance of this device is 130M (open space).