Table of Contents

Shenzhen Teyin Electronic Bluetooth Speaker User Manual

FCC id: 2BH6WRPS-62386

Thank you for choosing our product. We hope you will enjoy it very much.

Safety Instructions

Read this manual carefully before putting the appliance into operation and keep this manual for future reference.

Keep the device away from heat, direct sunlight and sharp edges.
Keep the device away from naked flames
Do not insert any metal object into the device, risk of short circuit.
To avoid static charge, do not use the device in an extremely dray climate
Do not repair the speaker yourself but contact an authorized specialist

Product Overview

Accessories included

1* USB charging cable
1* Manual

Charging Battery

This Bluetooth speaker is powered by rechargeable lithium battery. Charging the battery as follows:

Insert the charging cable into the DC SV socket on the speaker, connect the USB plug into a AC/DC adaptor. The LED indicator turns red and the battery is being charging.
When the battery is fully charged, the red LED indicator goes out.

Pairing speaker to mobile phone or other device

Rotary switch to turn on speaker, the red LED and blue LED are flashing alternatively, now the speaker is ready for pairing.

Search for bluetooth device “ZTS-03”, if password is needed, type in “0000”, after this speaker is paired with your device, connect it to your device.

Once this speaker is paired and connected to your mobile phone, next time when you switch on this speaker, it will connect to your mobile phone automatically as long as the bluetooth in your mobile phone is on.

Button description

Switch on or off the speaker and control the volume.

Short press for the previous song; long press to pause or play music.

Short press for the next song;

long press to change mode (BT mode/TF mode/USB mode), it just have BT mode when without TF or USB insert;

Double click to change the RGB light.

Troubleshooting

Symptoms	Causes	Solution
Can not turn on the speaker	Battery empty	Charging the battery
Unable to pair the speaker	Speaker is already switched on and it is not in pairing mode	Refer to the section of “Pairing speaker to mobile phone or other device”

Technical Specifications:

Power supplier: DC5V
Bluetooth version: Bluetooth5.3
Output power: 10W
Frequency: 280Hz——16KHz
Signal&noise ratio ≥ 95dB
Distortion ≤ 0.5%
Impedance: 4 OHM (Ω)
Lithium Battery: 1200mAhm
Play time: 3-4h
Speaker Unit: 66mm
Case Material: ABS+leather
Dimensions: 100*68*135mm
Working distance: Up to 10 m
Main function: Bluetooth/TF/USB/RGB light
Net Weight: 495g
Color: White\ Pink\Blue\Purple