Table of Contents
FLOSSOM Wearable Intelligent Flexible Beauty Apparatus WE200-M
For correct and safe usage of the product, please read this manual carefully before use. Keep it properly for future reference.
Interface and Buttons
Product Specifications
- Product Name: FLOSSOM Wearable Intelligent Flexible Beauty Apparatus
- Model: WE200-M
- Dimensions: Approx. Width 165mm x Depth 155mm x Height 48mm (skinpilot)
- Battery Capacity: 7.4V 250Ah
- Rated Input: 5V/2A (skinpilot)
- Charging Duration: Approximately 60 minutes (depending on the charging conditions)
- Battery Life: Approximately 60 minutes (depending on the operating conditions and the level selected)
- Standard: GB4706.1-2005/GB4706.15-2008
- Place of Origin: China
Magnetic Connection End with a Connection Contact
The magnetic connection is designed to interface with the Skinpilot using printed flexible conductive material located on the skin contact surface.
Magnetic Connection End without a Connection Contact
The outside of the connection end does not feature printed flexible conductive material, providing an outward-facing surface.
The FLOSSOM flexible conductive film fabric is used to ensure effective conductivity and connectivity.
Who and Where the Product is Not Intended For
The product is a small household appliance and not a medical device.
Please read the following content about prohibited behaviors and behaviors requiring attention carefully before use, and operate the product as instructed herein. The special circumstances listed below are not exhaustive. If it is difficult to determine whether the product is suitable for you, please consult a doctor, contact the customer service of our flagship store, or consult the authorized store where the product was purchased. You can also call our customer service hotline directly at (400-848-0056).
Charging Duration and Battery Life
- Charging Duration: Approximately 60 minutes (depending on the charging conditions).
- Battery Life: Approximately 60 minutes (depending on the operating conditions and the selected level).
Usage
Recommended Frequency of Use
It is recommended to use the product twice a week. The frequency of use can be adjusted based on your skin condition.
Control of Skin Care on Applet
The SkinPilot can be connected to the following mobile applet through Bluetooth:
- Before using the product for the first time, make sure to bind it.
- Scan the following code to access the FLOSSOM applet.
Summary of Instructions for Using the Product
3. Bind the Product
Bind the product as per the applet instructions. Binding is a one-time process allowing direct control of skincare via the applet.
4. Connect the Product to the Applet
- Enter the FLOSSOM applet and select the product.
- Power on the product, enable Bluetooth on your mobile phone, connect, and proceed with skincare.
- Note that some FLOSSOM applet functions may be updated over time.
Step-by-Step Instructions
STEP 1: Remove Makeup and Prepare
Remove makeup from the face and eyes, and clean the skin. Take off any contact lenses and metallic accessories such as earrings, necklaces, bracelets, and watches if present.
STEP 2: Power On and Wear the Skinpilot
Press and hold the power/level selection button, which two beeps will confirm is powered on. Wear it like a headband ensuring the sides are behind the ears and the button is on the right side.
STEP 3: Wet the Film Fabric
Evenly wet the flexible conductive film fabric with FLOSSOM-brand essence for about a minute. Apply any remaining essence on the face but avoid the fabric’s connectors.
STEP 4: Wear the Flexible Conductive Film Fabric
Place the film fabric on the face, adjust it to your face shape, and ensure the conductive material contacts the skin properly. Avoid folding the fabric and fold chin cut positions as needed. Connect the film fabric magnetically to the skinpilot for readiness, indicated by two beeps and a green light.
Note: Ensure no hair is caught between the connection points when attaching the film fabric to the skinpilot.
STEP 5: Adjust Current Level and Perform Skincare
Adjust the current level either on the skinpilot or through the applet:
- Skinpilot Adjustment: Press the power/level button to toggle through current levels 1, 2, and 3. It rotates in this sequence.
- Applet Adjustment: Set current levels for different facial areas on the applet. The applet will control the skinpilot’s output, with the indicator breathing blue, disabling manual adjustment on the skinpilot until disconnection.
Skin Care and Product Maintenance Summary
Upon completing the skin care process, indicated by two beeps, the device will automatically power off, with both the power and level indicators turning off. Detach the magnetic connections and remove both the flexible conductive film fabric and the device. You may wash your face or continue with further skin care if desired.
Product Cleaning and Maintenance Instructions
- After each use, clean the device with a soft cloth or tissues. Do not immerse in water.
- Ensure the device is powered off before maintenance to prevent electric shocks, short circuits, and fires.
- Avoid using solvents or chemicals such as alkaline cleaners, alcohol, thinner, gasoline, nail polish remover, or abrasives on the device.
- Remember, the flexible conductive film fabric is disposable and should not be used more than once.