Table of Contents
IGO1A 2.4G Manual
Product Features
- Compatibility: PC/PS3/Android/Nintendo Switch
- Wireless 2.4GHz technology with a range of up to 8 meters
- Hall Effect magnetic sensors for precise triggers and smooth operation
- Lithium Polymer 600mAh battery providing 10-15 hours of playtime; charges in 2 to 3 hours
- Hall Sensor 3D joystick without dead zones
- 19 numeric buttons including Home, Start, Select, etc.
- Special “Rapid Fire” with Turbo mode
- Dual vibration motors
- LED indicators for connection, charging, and other functions
- USB dongle receiver
- Charging cable length: 1m 5cm
- Dimensions: 155.5 x 103.7 x 59.8 mm
- Weight: 180g ± 10g
Power, Battery, and Standby
Power the gamepad on/off by pressing the Home button for 1 second. When the battery is low, the indicator light blinks quickly, indicating the need for charging.
Connected Mode
During charging, the current mode indicator blinks slowly and remains on when fully charged. In activity-free periods, the light turns off after 5 minutes.
Disconnected Mode
While charging, four indicator lights blink slowly and remain on once fully charged. The charging time is 2-3 hours, supporting 10-15 hours of playtime. You can save power by turning off the lights with the LED button.
Power Capacity Reminder
Short press the Turbo and Start buttons together to check power capacity:
- 1 LED: 1%-25%
- 1/2 LEDs: 26%-50%
- 1/2/3 LEDs: 51%-75%
- 1/2/3/4 LEDs: 76%-100%
Sleeping Mode
Disconnected Mode
Indicator lights blink quickly and turn off after 1 minute to enter sleep mode.
Connected Mode
Light remains on but turns off after 5 minutes of inactivity, entering sleep mode. Press HOME to wake up the gamepad.
Wired Mode Connection
Connect the gamepad to a PC using a cable and press the HOME button to activate it beyond the charging function. If both cable and dongle are connected, the USB cable remains in charging mode only.
Wireless Connection
On PC
Insert the dongle into the PC and power on the gamepad by pressing the Home button. The Second LED remains on, indicating X-input mode. Switch to D-input by pressing HOME for 2 seconds. To first connect, press HOME for 2 seconds after inserting the dongle.
On PS3
Plug the USB dongle into Playstation 3. Turn on the gamepad via [HOME] Button. Connection is confirmed when the First LED remains on.
On Nintendo Switch
Insert the USB dongle into the Nintendo Switch console. Connection is indicated by the First LED remaining on, featuring sensor and capture functions. The button functions adjust for Switch platform compatibility.
On Android
Plug the dongle into an OTG-compatible Android device. The gamepad connects when the Third LED remains on. Switch to mouse mode by pressing START and R3; both Third and Fourth LEDs remain on. Note: OTG converter not included.
Turbo Function Setting
- Keys available for Turbo: A/B/X/Y/LB/RB/LT/RT
- Enable Turbo: Press Turbo key and any function key
- Clear Turbo: Press Clear key and the active function key
- Three Turbo speeds: Slow (5 shots/s), Medium (12 shots/s), Fast (20 shots/s)
- Adjust speed: Press Turbo and move the right joystick (right to increase, left to decrease)
- Clear all Turbo settings: Hold Turbo for 5 seconds and Select for vibration feedback
Adjust Vibration Intensity
- Four levels: None, Weak, Medium, Strong
- Adjust intensity: Connect the gamepad, then press Turbo and move the right joystick up or down
Joystick Special Features
- Switch joystick drawing from circles to squares: Hold L3 + TURBO for 1 second
- Circle drawing error percentage: 0%
- Applicable on SWITCH and PC platforms
- Default setting: Drawing circles
Calibration and Polling Rate
Enter calibration by holding L1 + SELECT while connecting to a computer. For polling rate, wired connection supports 1000Hz.
Controller Reset and Factory Settings
Force reset by holding HOME for 8 seconds if malfunction occurs. Restore factory settings by locking the button wake-up feature. Unlock by connecting a USB charger.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation includes the conditions: no harmful interference and acceptance of received interference. Unauthorized modifications could void user authority to operate equipment. Solutions for interference include reorienting or relocating the antenna, increasing separation, changing circuits, or consulting a technician.