Table of Contents
AiYin Portable Label Printer User Manual
AiYin Portable Label Printer User Manual
(2BDL3-MP231)
Packing List
After unpacking, check the appearance of printer, make sure you have all parts. Contact the seller if you found any defective or missing.
Appearance and Components
Battery Installation
1.Detaching the battery
Press the battery button to detach the battery (Make sure you turn off the printer before you detach the battery .
2.Attach the battery
Attach the battery per direction of picture. Make sure the electrode is in proper direction.
Caution
- Please use the battery of right type, otherwise it could result in a potential battery explosion.
- Make use you dispose the used battery per instructions.
Printer Charging
Plug the charger into an appropriate AC electrical outlet, insert the Type-C connector of the charger into the printer’ s power receptacle.
AC: 100V~240V (50-60Hz)
Warning
Using a charger which is not provided or authorized by our company could result in printer damage.
Caution
Do not detach the battery while charging.
Note
You can conduct printing while charging.
Loading Roll Media
1.Open the top cover
Press “OPEN” button to release the cover.
2.Loading roll media
Remove the seal and load the roll media into the printer per direction as Picture A (Make sure you load it in the proper direction)
3.Close the top cover
The roll media and cutting blade should align.
Then close the top cover.
Basic Functions Instruction
Press power button to turn on the printer
Standby mode: Press power button and feed button simultaneously for 3 seconds, it switches into menu mode.
Menu mode:
- Press power button to switch the menu items; Press feed button to select item and execute it.
- Press power button and feed button simultaneously for 3 seconds, it switches into standby mode.
1. Printing a test label
You can select and execute “Printing a test label” in the menu mode, then it will print a test label.
2.Printing quality
You can select and execute “Printing quality” in the menu mode, then you can choose the printing density ( 1 means lowest; 5 means highest; 3 means neutral.) Press feed button once to confirm the setting. When the setting’s done, there will be a notification of “Succeeded”.
3.Adaptability
You can select and execute “Adaptability” in the menu mode, then the printer will adapt the gap per roll media (Make use you use a roll media with gaps).
4.Client mode
You can select and execute “Client mode” in the menu mode, then select a suitable client mode, press the feed button to execute the setting. When the setting’ s done, there will be a notification of “Succeeded”. You need to restart the printer after setting, then you can match the printer by Bluetooth.
Basic Functions Instruction
5.Dashed solid line
You can select and execute “Dashed solid line” in the menu mode, then you can select “Open” or “Close” in the submenu (Open mode: the transverse line printed will be the dashed line; Close mode: the transverse line printed will be solid light). Press the feed button to execute the setting. When the setting’ s done, there will be a notification of “Succeeded”.
6.Hex printing
This is a special menu item for engineer testing, not for users.
7.Feed when closed
You can select and execute “Feed when closed” in the menu mode, then you can select “Enable” or “Disable” in the submenu ( Disable mode: it won’ t feed when closed; Enable mode: it feeds one plain paper when closed. The default mode is Disable) Press the feed button to execute the setting. When the setting’ s done, there will be a notification of “Succeeded”.
8.Exit
You can select and execute “Exit” in the menu mode, then you can exit the menu mode.
Note
You can change the configuration by users’ tools.
Cautious
We appreciate your help in letting us or the sellers know about if there’s anything wrong or missing of the information listed in this manual.
Bluetooth Connecting and Usage
1.For mobile phones of Android
- Step 1: Turn on the printer;
- Step 2: Search device in Bluetooth interface, select the printer and connect. The original password is 0000 or 1234. When the Bluetooth pairing’s done, turn on Bluetooth mode per picture;
- Step 3: Open the APP.
2.For mobile phones of iOS
- Step 1: Turn on the printer and Bluetooth.
- Step 2: Open the APP, link the printer and print.
Troubleshooting
Note
Use unqualified media could result in vague printed image in short time.
Maintenance
Printer daily maintenance
- Printer Exterior and media path cleaning: Use water dampened cloth to wipe the exterior and interior of printer. Make sure the dampened cloth is wrung out.
- Components cleaning: Make sure you clean the components in a regular time. The cleaning method is as follow: Use absorbent cotton with dehydrated alcohol, to gently wipe the two parts of printer components, which are highlighted by thick lines in the picture below.
3. If you find the interior of printer gets wet, detach the battery immediately, and dry it up in a ventilated area.
4. If you don’ t use the printer for a long period, detach the battery and store it separately.
The usage and storage of the printer media
- Store the new purchase printer media in a cool place without sunshine. Do not tear off the protection film before you use it.
- The printed data should be stored in room temperature (Around 20 °C), this could extent the retention period.
- Use a long retention thermal media if the data needs to be kept for a long time.
Product Warranty Card
Dear customer: Thank you for using our product, since purchase, you have below services: [Free Maintenance]
Since the date of your purchase, product performance failure caused by non-human damage according to the following warranty period:
[Paid Maintenance]
In the following cases (including but not limited to), you can choose paid services:
- No warranty card or missing valid invoice or exceeding the warranty period;
- No iData mark or illegible product number;
- Damage caused by failure to use, maintain keep, disassemble or repair the machine in accordance with the requirements of the product manual;
- Damage caused by customers in using non-authentic(iData) accessories (print head, motherboard, power adapter, data cable, etc.);
- Normal wear and tear during use of the product;
- Damage caused by unauthorised service personnels disassembly;
- The user’s own network and software cause the product to be unusable;
- Damage caused by accident or human factors (operation error, scratch, handling bump, improper input voltage, etc.);
- Damage caused by improper storage by users, or loss of product parts (rodent, insect pest, liquid infiltration, foreign matter entry and other similar reasons);
- Damage caused by force majeure such as natural disaster (earthquake, fire, etc.).
Note: Required accessories for repairing are valid for a 1 year after the product discontinued
After-sale Service
Service Email: [email protected] or contact the salesman/local dealer/authorized repair station
Official Website: www.idataglobal.com
Head Office Address: Floor 11,Building B1,Wuxi(Binhu)National Sensing Information Center,N0.999 Gaolang East Road Wuxi
City, Jiangsu Province,P.R.C
2022©@ WUXI IData TECHNOLOGY COMPANY LTD. reserves the right of final interpretation of this warranty and conditions.
AiYin Portable Label Printer User Manual