Table of Contents
Robot Vacuum Cleaner Instruction Manual
Before using this product, please carefully read this manual and keep it in a safe place.
X7-D
About the Robot Vacuum Cleaner
Find out everything you need to know about the Robot Vacuum Cleaner.
What’s in the Box
Discover the contents included in your purchase.
About Robot Vacuum Cleaner Main unit
About the Robot Vacuum Cleaner Sensor and Structure
About the Robot Vacuum Cleaner
This device features a 2-in-1 design that includes both a dust box and a water tank. Additionally, it comes with a dust collection station for enhanced cleaning efficiency.
Installation Precautions
Before starting the machine, clear away any wires and debris scattered on the floor. Remove items that are prone to falling, are fragile, valuable, or potentially dangerous. Avoid being entangled, stuck, dragged, or knocked down by the machine; otherwise, it may cause personal injury or property damage.
Don’t use the machine to clean liquid.
In areas prone to falls or where cleaning is prohibited, use the App to set up a virtual wall after the auxiliary machine has completed mapping. This will help prevent accidental falls or the pushing of other objects, which could otherwise lead to personal injury or property loss.
Installation
1. Remove the protective materials from both sides of the robot vacuum cleaner.
2. Install the side brushes: Align the side brush with the side brush hole on the bottom and press down. You will hear a “click,” which means the side brush is installed correctly
3. After connecting the power cord to the power source, tidy up any excess wires.
4. Place the dust collection station on a flat surface against a wall and connect it to a power source.
5. Do not move the dust collection station unnecessarily and avoid direct sunlight.
Notice: Sunlight may interfere with the charging signal, preventing the machine from returning to the dust collection station.
6. Power on and charge:
Press the cleaning button to turn on the machine. When the indicator light is illuminated, place the machine on the charging station to charge. When you hear the “Start Charging” sound, it indicates that the machine is successfully charging.
Notice:
The indicator light remains lit when the dust collection station is powered on and turns off when the machine is charging.
Illustrate:
If the machine’s battery is low, it will not power on. To resolve this, place the machine on the dust collection station, and it will automatically power on.
Installation(Moping function)
1.0pen the water filling cap, add an appropriate amount of water,
and then close it tightly. Do not add any detergent.
2. Install the 2 in 1 dust box and water tank onto the machine
3.Install the mop on the mop holder.
4.Install the mop holder.
APP Connection
Preparation Before Connection
Download the APP
Scan the QR code to download the app or search for “Smart Life” or “Tuya Smart” in major app markets to download it. Please note that the router supports wireless signals in the 2.4GHz band.
After downloading and installing the app, open it and create an account.
1. Register and log in to the APP.
2. Turn on mobile phone positioning, WiFi, and Bluetooth, and authorize the app to access both WiFi and Bluetooth.
3. First, start the machine by pressing and holding the recharge button for more than 3 seconds. Continue until the voice prompt or indicator light flashes quickly, indicating that the machine has entered network mode.
4. Click “Add a device” or “+” in the top right corner
5.Add already searched machine
6. Select 2.4GHz WiFi network and enter the password
7.Complete connection
Use Instructions(Machine button)
Usage Instructions Summary
Power On/Off
To power the machine on or off, press and hold the cleaning button () for more than 3 seconds. An indicator light or voice announcement will confirm the change of state—on if there’s an announcement or light, and off if both are absent.
Recharge/Stop
Activate charging by pressing the recharge button on the machine or via the mobile app. The machine will charge in standby mode. If it’s not in standby, charging won’t initiate automatically.
Note: If the vacuum cannot locate the dust collection station, it will return to its starting position. Manually place it on the station for charging if needed.
Reset Button
To reset the machine, press the reset button using a needle.
Clean/Pause
Start cleaning by pressing the cleaning button (O) either on the machine or via the mobile app. The machine will clean in standby mode and pause when not in standby.
Use Instructions(Cleaning mode on APP)
Smart Cleaning
The machine scans the work environment, generates a map, and intelligently divides the areas. Once the cleaning is complete, the machine returns to the dust collection station to recharge.
To map more effectively, the machine should perform its initial cleaning starting from the dust collection station.
Notice:
Avoid moving the machine frequently during operation. If moved, return it near its original location. Upon restarting, the device will attempt to reposition its coordinates for continued operation. If positioning fails, it will create a new cleaning map, potentially without charging capacity. Ensure to complete the initial cleaning map setup in the mobile app before using this function.
Use Instructions (Cleaning Mode on App)
Cleaning of Selected Area
Use the mobile app to select the cleaning function for the desired area. Choose the area to be cleaned on the map, and the machine will proceed to clean the selected area.
Notice:
- Before using this function, please complete the creation of the initial cleaning map in the mobile app.
- The machine may enter unintended areas, so please remove any obstacles on the ground around the designated area, as they cannot serve as effective barriers.
Cleaning of Defined Area
Use the mobile app to select the cleaning function for a defined area. Choose the area you wish to clean on the map, and the machine will clean within the specified area.
Notice:
- Before using this function, please ensure that the construction of the initial cleaning map in the mobile app is complete.
- The machine may enter unplanned areas, so please clear any obstacles on the ground around the planned area, as these cannot serve as safe isolation points.
Routine Maintenance
Battery
- The device is equipped with a built-in rechargeable high-performance lithium-ion battery pack. To maintain battery performance, please keep the machine charged during daily use.
- If the machine is not used for an extended period, it should be shut down for storage and charged every three months to prevent battery damage due to over-discharge.
Firmware Upgrade
- Access the firmware upgrade function through the mobile app. After detecting new firmware, upgrade according to the prompts.
- When upgrading, the machine must be placed on the charging station for charging. It is recommended that the battery capacity be no less than 50% before upgrading.
Basic parameters
| Host Parameters | |
| Model No. | X7-D |
| Size | ⌀320 x 97 mm |
| Battery | 2600 mAh lithium-ion battery |
| Rated Voltage | 14.8 V |
| Rated Power | 32 W |
| Charging Time | 4-5 hours |
| Dust Box Capacity | 230 ml |
| Water Tank Volume | 240 ml |
| Dust Collection Station Parameters | |
| Size | 320 x 165 x 240 mm |
| Rated Voltage | AC 110 V |
| Rated Power | 1000 W |